Alpine R-W10D2 10″ Dual 2-ohm Component Subwoofer

#ad
Alpine R-W10D2 #ad - Its dual oversized 2-ohm voice coils offer wiring flexibility you'll appreciate as your system changes and grows, so you can always pull maximum power from your amp. Maximum bass output for those who like it loud, Alpine salutes you! Their legendary R-Seriessubwoofers are made to bring powerful bass to just about any vehicle.

Power handling: 750 watts RMS 375 watts per coil. The r-w10d2 10" sub features a cone made from kevlar treated pulp - the same material used to make bulletproof vests - while its durable Santoprenetm surround allows for huge amounts of excursion. For more information, please refer to our article on How to Match Subwoofers and Amplifiers.

Alpine R-W10D2 10" Dual 2-ohm Component Subwoofer #ad - To drive this single subwoofer, we recommend a mono amplifier rated between 560 and 1125watts RMS at 1 or 4 ohms. Bring on the power the r-w10d2 can handle up to 750 watts RMS, so be sure to choose a suitable amplifier as these bass monsters definitely want lots of power. Alpine built this sub for bassheads who want the best of both worlds: accurate response and otherworldly thump.

It works well in sealed and ported enclosures so you can choose what kind of bass you want to hear and feel. Top-mount depth: 5-7/8". Kevlar reinforced pulp cone with HAMR Santoprene rubber surround. Note: if you are wiring this DVC sub for lower impedance, make sure that your amp is compatible.

More information about Alpine R-W10D2 #ad

BBox E10SV Single 10" Vented Carpeted Subwoofer Enclosure

#ad
ATREND E10SV #ad - Net volume - 082". Bbox e10sv 10-inch single vented Subwoofer Enclosure  W 16. 00" x h 12. 00" x d 15. 50"   -  vent W 1. 25" x h 1050" x deep 24. 00"  "l" shape ventGross Cu. 1. 25  net Cu. Premium Charcoal Carpet. 90  tuning 39hz  Speaker hole cutout 9. 12"speaker face is 1. 00" body is 5/8"extra large terminals cups wire will be needed to run from the speaker and soldered to the terminal cup tabsIMPORTANT:Confirm the required speaker hole cutout is no more than 9.

12". Cutout diameter - 9. 125". Height 11. 75 x width 16. 25 x depth 15. 25 inches. Max mounting Depth - 11. 5". Ft. Ft.

More information about ATREND E10SV #ad


Similar products



Alpine KTE-10G 10" Type-R / Type-S Subwoofer Grille Grill

#ad
Alpine KTE-10G #ad - 10" protective 2-Piece Subwoofer Grille. Net volume - 082". Height 11. 75 x width 16. 25 x depth 15. 25 inches. Provides the best protection possible for your Alpine subwoofer. 10" protective 2-piece subwoofer grille for Alpine Type R, S, & E Subwoofers Cutout diameter - 9. 125". Premium Charcoal Carpet. Includes all necessary mounting hardware.

Works with alpine Type R, S, & E subwoofers. Max mounting Depth - 11. 5".

More information about Alpine KTE-10G #ad


Similar products



Alpine RUX-KNOB.2 Remote Bass Level Control

#ad
Alpine RUX-KNOB #ad - This handy little knob adjusts your amp's level from its set maximum volume all the way down to virtually "off. Since it adjusts level and not "bass boost, " you'll maintain the same bass tone as you turn the volume up and down. You can control multiple amplifiers with a single remote by adding a standard phone cable splitter not included.

Alpine RUX-KNOB.2 Remote Bass Level Control #ad - Provides the best protection possible for your Alpine subwoofer. Height 11. 75 x width 16. 25 x depth 15. 25 inches. Cutout diameter - 9. 125". Works with alpine Type R, S, & E subwoofers. Works with newer X Series Alpine Amplifiers. Premium Charcoal Carpet. The rux-knOB. 2 remote level controller works with Alpine's amplifiers so you can manage your bass level from the front of your vehicle.

Net volume - 082". Backwards Compatible with PDX Amplifiers.

More information about Alpine RUX-KNOB #ad


Similar products



SoundBox Connected 4 Gauge Amp Kit Amplifier Install Wiring Complete 4 Ga Installation Cables 2200W

#ad
SoundBox Connected ECK4 #ad - Black/white triple shielded Twisted Pair RCA Interconnect: 17 Feet. General features:  2300 watts peak power rating complete 4 gauge amp install kit heat resistant wire jacket premium heat durability in-line agu fuse holder triple shielded rca interconnect cable premium grade cables   what's included:  4 gauge red cca copper clad aluminum power Wire: 17 Feet 4 Gauge Black CCA Copper Clad Aluminum Ground Wire: 3 Feet Black/White RCA Interconnect: 17 Feet 16 Gauge Brown/Silver Speaker Wire: 17 Feet 18 Gauge Blue Remote Wire: 18 Feet Protective Black Wire Loom Inline AGU Fuse Holder 80 Amp AGU Fuse Installation Accessories/ Connectors Terminals, Wire Ties and Wire Loom Included Authorized Internet Retailer 1 Year Manufacturer's Warranty Please Note:  Bulk Packaged.

SoundBox Connected 4 Gauge Amp Kit Amplifier Install Wiring Complete 4 Ga Installation Cables 2200W #ad - Net volume - 082". Provides the best protection possible for your Alpine subwoofer. Backwards Compatible with PDX Amplifiers. Installation accessories/ Connectors / Terminals, Wire Ties and Wire Loom Included. Works with newer X Series Alpine Amplifiers. 4 gauge red cca copper clad aluminum power wire: 17 Feet / 4 Gauge Black CCA Copper Clad Aluminum Ground Wire: 3 Feet.

Max mounting Depth - 11. 5".

More information about SoundBox Connected ECK4 #ad


Similar products



Alpine R-Series 6.5 Inch 300 Watt Coaxial 2-Way Car Audio Speakers, Pair | R-S65

#ad
Alpine R-S65 #ad - 6. 5" 2-way car speakers pair. Black/white triple shielded Twisted Pair RCA Interconnect: 17 Feet. Backwards Compatible with PDX Amplifiers. 10" protective 2-Piece Subwoofer Grille. Installation accessories/ Connectors / Terminals, Wire Ties and Wire Loom Included. Top-mount depth: 2-3/8". Handles up to 100 watts RMS 300 watts peak power.

Alpine R-Series 6.5 Inch 300 Watt Coaxial 2-Way Car Audio Speakers, Pair | R-S65 #ad - Hybrid fiber woofer with multi-roll rubber surround | 1" silk dome tweeter. 16 gauge brown/silver speaker wire: 17 Feet / 18 Gauge Blue Remote Wire: 18 Feet. Works with newer X Series Alpine Amplifiers. Max mounting Depth - 11. 5". Frequency response: 65-29, 000 Hz | Sensitivity: 88 dB. Works with alpine Type R, S, & E subwoofers.

Includes all necessary mounting hardware. Inline agu fuse holder w/ 80 amp AGU Fuse / Protective Black Wire Loom. Height 11. 75 x width 16. 25 x depth 15. 25 inches.

More information about Alpine R-S65 #ad


Similar products



Alpine PDR-M65 Mono Digital Amplifier

#ad
Alpine PDR-M65 #ad - Max mounting Depth - 11. 5". Black/white triple shielded Twisted Pair RCA Interconnect: 17 Feet. Top-mount depth: 2-3/8". Installation accessories/ Connectors / Terminals, Wire Ties and Wire Loom Included. 16 gauge brown/silver speaker wire: 17 Feet / 18 Gauge Blue Remote Wire: 18 Feet. Works with alpine Type R, S, & E subwoofers.

Alpine PDR-M65 Mono Digital Amplifier #ad - 10" protective 2-Piece Subwoofer Grille. Hybrid fiber woofer with multi-roll rubber surround | 1" silk dome tweeter. Provides the best protection possible for your Alpine subwoofer. Net volume - 082". Low pass Filter. Handles up to 100 watts RMS 300 watts peak power. Alpine pdr-m65 monoblock class d 650 watt rmS Compact Car Amplifier With Included Birthsheet Cutout diameter - 9.

125". 6. 5" 2-way car speakers pair. Works with newer X Series Alpine Amplifiers. Inline agu fuse holder w/ 80 amp AGU Fuse / Protective Black Wire Loom. Height 11.

More information about Alpine PDR-M65 #ad


Similar products



KnuKonceptz Kolossus 4 Gauge OFC Amplifier Installation Kit

#ad
KnuKonceptz KOL-AK4 #ad - The knukonceptz fh-44 fuse holder with a 120a fuse is provided within the KOL-AK4 amp install kit, but can be upgraded to a maximum of 150A fuse sold separately. Mini-anl fuse holder with 120A fuse. Works with alpine Type R, S, & E subwoofers. Rms power: 450w x 1 @ 4 ohms, 650W x 1 @ 2 ohms. Backwards Compatible with PDX Amplifiers.

16 gauge brown/silver speaker wire: 17 Feet / 18 Gauge Blue Remote Wire: 18 Feet. This wire is connected to your radio's power antenna lead or amp turn on lead refer to your head unit's manual Your amplifier's output is sent through KnuKonceptz Kord 12 gauge speaker wire, 20 feet of 12 gauge blue speaker wire is included with the kit.

KnuKonceptz Kolossus 4 Gauge OFC Amplifier Installation Kit #ad - Frequency response: 65-29, 000 Hz | Sensitivity: 88 dB. It also allows the installer to extend the power wire 1-3' by using the inline fuse holder to add cable to the main run leaving the 18' as one unit and using the FH-44 to "splice" a few feet of wire Signal for your 2 channel amplifier installation kit is carried by the Klarity Kable 5 Meter 16.

25' rca cable. 20' 12 gauge kord OFC Speaker wire. Max mounting Depth - 11. 5". Provides the best protection possible for your Alpine subwoofer. 10" protective 2-Piece Subwoofer Grille.

More information about KnuKonceptz KOL-AK4 #ad


Similar products



GM Series 2, 400-Watt Monoblock Class D Amp

#ad
Pioneer GMD9701 #ad - Low pass Filter. Provides the best protection possible for your Alpine subwoofer. Works with newer X Series Alpine Amplifiers. Height 11. 75 x width 16. 25 x depth 15. 25 inches. Dimensions: 9" w x 7-1/8" d x 2-1/16" H. Over sized tinned Oxygen Free Copper Power Cable. Net volume - 082". 4 gauge red cca copper clad aluminum power wire: 17 Feet / 4 Gauge Black CCA Copper Clad Aluminum Ground Wire: 3 Feet.

Top-mount depth: 2-3/8". Frequency response: 65-29, 000 Hz | Sensitivity: 88 dB. 1 pair of Preamp Outputs. Signal-to-noise ratio: 100dB. This car amp has block terminals for a cleaner Installation and direct wire contact to minimize resistance. Black/white triple shielded Twisted Pair RCA Interconnect: 17 Feet.

GM Series 2, 400-Watt Monoblock Class D Amp #ad - 16 gauge brown/silver speaker wire: 17 Feet / 18 Gauge Blue Remote Wire: 18 Feet. 6. 5" 2-way car speakers pair. The pioneer gm-d9701 gm series 2, 400 watt monoblock class D amp Features a rugged frame design with a high-quality, textured flat panel to combine strength and simplicity. Premium Charcoal Carpet.

More information about Pioneer GMD9701 #ad


Similar products



MicroBypass Parking Brake Override Bypass for Alpine

#ad
MicroBypass AlpineMicroBypass #ad - Inline agu fuse holder w/ 80 amp AGU Fuse / Protective Black Wire Loom. 6. 5" 2-way car speakers pair. Alpine automatic parking brake override Bypass for Video in Motion Activation Interface and Simple How to Install Instructions Included. Works with all Aftermarket Alpine Video and Navigation units. Handles up to 100 watts RMS 300 watts peak power.

Net volume - 082". Signal-to-noise ratio: 100dB. Backwards Compatible with PDX Amplifiers. Video in Motion Activation. Installation accessories/ Connectors / Terminals, Wire Ties and Wire Loom Included. Works with alpine Type R, S, & E subwoofers. Includes all necessary mounting hardware. 800w rms x 1 @ 2ω. Height 11.

MicroBypass Parking Brake Override Bypass for Alpine #ad - 75 x width 16. 25 x depth 15. 25 inches. 20' 12 gauge kord OFC Speaker wire.

More information about MicroBypass AlpineMicroBypass #ad


Similar products

Bookmark the permalink.

Comments are closed