As an Amazon Associate I earn from qualifying purchases.1. Binen
#ad20A Solar Charge Controller Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display
#adBinen #ad - Lcd display: comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, industrial, suitable for home, commercial etc. Fully 3-stage pwm charge management, improve system efficiency and prolong the life span of the battery.
For protecting the lifespan of your battery, liions, GEL, once the voltage of the battery drop below 8V, lithium, AGM, it is not suited for nickel hydride, the solar controller will turn off automatically. Please be careful to install the charger controller on a flat, then the solar panel, well-ventilated place.
Multiple protection functions: binen solar controller has short-circuit protection, open-circuit protection, reverse protection, over-load protection.20a solar charge controller : binen solar charger controller are ul 1741 certified, build-in industrial micro controller, the solar charger controller compatibility with 12V 24V system.
Discharge current: 10A, automatically manage the working of solar panel and battery in solar system. Dual usb output 5V/2. 5a max, to support mobile phone chargeing. Easy to install and operate: the charge controller should connect the battery first, and finally the load! The disassembly sequence is contrary to the wiring order. Dual mosfet Reverse current protection, low heat production.
| Brand | Binen #ad |
| Manufacturer | Binen #ad |
| Part Number | 4332694907 |
2. PowMr
#adSolar Panel Charge Controller 12V 24V, Max 48V 1560W Input Adjustable Parameter LCD Display Current/Capacity and Timer Setting ON/Off with 5V Dual USB, PowMr 60a Charge Controller
#adPowMr #ad - Backlight lcd display pv/ battery/ load charge and discharge parameter. Notes: for any reason you are unsatisfied with our product, just feel free to contact support for exchange or refund. Adjustable floating voltage/ LVD/ LVR/ Load Timer according needs for this charge controller.
Pwm charge controller protection - dual mosfet reverse current/ over heat /Under-voltage discharge discharge / open-circuit / short-circuit / over-load/ over-charging protection. Load should be DC.
Add feature: charge and Discharge Current, Charge and Discharge energy recording function. This solar charge controller fit for lead-acid batteries open, once the voltage of the battery drop below 8V, AGM, GEL with mutiple load timer.
This 60a charge controller compatibility with 12v and 24v system. Our email:
[email protected] Com. 12 months honor warranty from powmr and 24hrs after service. For protecting the lifespan of your battery, the solar controller will turn off automatically. Fully 4-stage pwm charge boost, abs, 12v780w / 24v1560w input, Equalization, Float, Dual USB can give your electronic product max 5V 2A. More safe using for home, industrial, commercial etc.
3. ALLPOWERS
#adALLPOWERS 20A Solar Charger Controller Solar Panel Battery Intelligent Regulator with USB Port Display 12V/24V
#adALLPOWERS #ad - Functionality: equipped with industrial-grade STM 8 microprocessor to control the charger and discharge process and it has reliable battery to charge and discharge period management. Good heat dissipation: dual mosfet reverse current protection, low heat productionALL electronic components generate heat when they are running, it is better to shelter them for better heat dissipation, avoid direct sunlight exposure or damp place.
Adjustable power rate with dual usb ports; 3-StageBulk, ABS, Float charge management and 4-Stage PWM charge.
Any items ordered from other sellers, it can be conveniently switched modes and parameter configuration, ALLPOWERS will not be responsible for the After-Sales. Warranty only against products from ALLPOWERS.
Please notice the controller might be power off if the battery voltage is too low. Rated discharge current: 20a; usb output voltage: 5v/3a; battery voltage: 12v/24v auto. Mutiple electric protection: Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection. Easy to use: comes with a display that can clearly indicate the status and data, suitable for home, industrial, commercial etc.
| Brand | ALLPOWERS #ad |
| Manufacturer | ALLPOWERS #ad |
| Part Number | FBA_AP-OT-002-BBLU |
| Model | FBA_AP-OT-002-BBLU |
4. GHB
#adGHB 20A 12V 24V Solar Charge Controller Auto Switch LCD Intelligent Panel Battery Regulator Charge Controller Overload Protection Temperature Compensation
#adGHB #ad - The battery indicator light on the controller will be on if successfully connected, to check and reconnect. To connect your load and the cables with the right polarity and then connect with the load output port of the controller. Lcd screen display >> this solar panel charger controller with lcd to display all parameters, more beautiful, the users can intuitively know the working condition of the controller.
Rated discharge current >> 20a; usb output voltage: 5v; total usb output current: 3a; dc output voltage: 12v. Use pwm&wpc mode, lightning protection, Under-voltage protection, improve system efficiency and prolong the life span of the battery.
The lcd display is with built-in energy-saving backlight LCD, the LCD has rich contents, display better, more clear, more modern and more power-efficient. Available for DC lamp and phone charging. Protection functions >> overload and short circuit protection, Over-charging protection, Reverse Polarity protection charge controllers for solar panels.
Kindly suggest to use standard 11-15 AWG wire to connect with terminals perfectly. Fully automatic >> this solar panel regulator with output switch, easy to operate, otherwise, intelligent control, to connect the controller and the battery by cables with the right polarity. Power-efficient >> microcontroller digital accuracy, the arrow between the panel icon and the battery icon will flashe fastly, when it's charging, will stop charging, when the battery was a full charge, it will be slow flashed, the function of the controller is to protect the voltage overshoot and discharge.
| Brand | GHB #ad |
| Manufacturer | Smile&Satisfaction #ad |
| Height | 1.18 Inches |
| Length | 5.12 Inches |
| Width | 3.94 Inches |
| Part Number | 43237-2 |
5. Renogy
#adRenogy Wanderer 10 Amp 12V/24V PWM Negative Ground Solar Charge Controller Regulator Compatible with Bluetooth Module
#adRenogy #ad - Then secure each cable by rotating the screws clockwise CW to the closed position. Smart 4-stage pwm charging bulk, and equalization increases battery life and improves system performance. Optimized for a 12v/24v system; deep Cycle Sealed AGM, Gel, Flooded and Lithium battery option ready.
Intelligent protection against reverse polarity, Float, Boost, short-circuit, overcharging, and reverse current. Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position.
Capable of charging over-discharged lithium batteries. Power source Type: Solar-Powered. Backlit lcd screen displays system operation, diverse load control, and error codes. Simple install: fully open the hatch CCW, insert the appropriate wires, and completely close the hatch CW.
Integrated rs232 port allows communication with BT-1 Bluetooth module and usage of Renogy BT smartphone app. Integrated 5v 2a usb ports to charge USB devices. Wanderer10a|30a installation notes: the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch. Compact in size makes it easy to install virtually anywhere.
| Brand | Renogy #ad |
| Manufacturer | Renogy #ad |
| Height | 1.1 Inches |
| Length | 4.7 Inches |
| Width | 3 Inches |
| Part Number | Charge Controller |
| Model | Wanderer 10 Amp 12V/24V |
| Warranty | 1-year material warranty |
6. Binen
#ad30A Solar Charge Controller, Solar Panel Charge Controller 12V 24V Dual USB Charge Regulator Intelligent, Adjustable Parameter Backlight LCD Display and Timer Setting ON/Off Hours 30A
#adBinen #ad - Easy to install and operate: the charge controller should connect the battery first, then the solar panel, low heat production. Lcd display: comes with a display that can clearly indicate the status and data, industrial, suitable for home, it can be conveniently switched modes and parameter configuration, commercial etc.
Please be careful to install the charger controller on a flat, and finally the load! The disassembly sequence is contrary to the wiring order. Dual mosfet Reverse current protection, well-ventilated place. Battery type: the charge regulator is only suitable for lead-acid batteries: oPEN, lithium, GEL, once the voltage of the battery drop below 8V, Liions, or other batteries.
Fully 3-stage pwm charge management, once the voltage of the battery drop below 8V, improve system efficiency and prolong the life span of the battery.
For protecting the lifespan of your battery, reverse protection, open-circuit protection, the solar controller will turn off automatically. Dual usb output 5V/2. 5a max, the solar charger controller compatibility with 12V 24V system. For protecting the lifespan of your battery, it is not suited for nickel hydride, AGM, the solar controller will turn off automatically. Multiple protection functions: binen solar controller has short-circuit protection, over-load protection.
| Brand | Binen #ad |
| Manufacturer | Binen #ad |
| Height | 1.97 Inches |
| Length | 3.94 Inches |
| Weight | 0.44 Pounds |
| Width | 1.97 Inches |
7. ZEALLIFE
#ad8A Battery Regulator for 12V Solar Battery Charger, Solar Battery Maintainer and 12 Volt Batteries Power Kit Safe Protection, ZEALLIFE Solar Panels Charge Controller
#adZEALLIFE #ad - The product also provides overcharge, over-discharge, as well as short-circuit and reverse-connection protection. Apply to 12v solar panels:the 8a solar controller is used only for 12V solar panels and 12V batteries. All-round protection :the product provides overcharge, over-discharge, overload protection, as well as short-circuit and reverse-connection protection.
The controller needs to be connected to a battery to work. Users don't have to worry about positive + and negative -. It is suitable for 12V rechargeable batteries.
Easy to monitor the led indicator lights:the solar controller integrates two LED lights, overload protection, green fully charged and yellow charging. Advantage 2: if there is connection errors，it will not be damaged. The solar panels can convert light energy into electric energy stored in batteries which will be protected by the solar controller.
Advantage 1: it will turn off automatically at night, and won’t consume battery power. The maximum input of solar energy is 130w:the maximum power of solar panels is130W, and the maximum current 8A. In order to lengthen its service life, the maximum voltage 22V, please do not overload. Quick and easy connection:this solar charge controller uses SAE plugs for easy use and access to solar panels, batteries and loading equipment.
| Brand | ZEALLIFE #ad |
| Manufacturer | ZEALLIFE #ad |
| Height | 3.9 Inches |
| Length | 4.7 Inches |
| Weight | 5.9 ounces |
| Width | 1.5 Inches |
| Part Number | Solar Panels Charge Controller 8A |
| Model | Solar Panels Charge Controller 8A |
8. Renogy
#adRenogy 100 Watts 12 Volts Monocrystalline Solar Starter Kit
#adRenogy #ad - Includes 100w solar panel + 30a pwm negative ground charge controller + MC4 Connectors +8Ft 10AWG Tray Cable+ Mounting Z Brackets for RV, Boat. 29a. Negative grounding controller with battery reversed, overloading, short-circuit and over charging/discharging protection ensures the broader off grid applications and safety.
Corrosion-resistant aluminum frame for extended outdoor use, allowing the panels to last for decades.
Optimum operating Current Imp: 5. Especially can be used on a vehicle which has battery negative on the chassis. Monocrystalline solar cell efficiency: 21%；The Charge controller has been upgraded to Renogy new 30A PWM negative ground charge controller The Renogy wanderer.
Ideal output: 500wh per day; can fully charge a 50Ah Battery from 50% in 3 hours depending on the availability of sunlight. With the renogy wanderer 30a pwm charge Controller, you can expand your system up to a maximum of 400W.
| Brand | Renogy #ad |
| Manufacturer | renogy #ad |
| Height | 20.87 Inches |
| Length | 47.01 Inches |
| Weight | 19.84 Pounds |
| Width | 1.5 Inches |
| Part Number | KIT-STARTER-100D |
| Model | KIT-STARTER-100D |
9. SUNER POWER
#adIntelligent12V/24V Solar Panel Battery Regulator, SUNER POWER Waterproof 10A Solar Charge Controller
#adSUNER POWER #ad - Ip65 waterproof design, compatible with suner power bc sereis solar battery charger including BC-2. 4w/bc-6w/bc-8w/bc-12w/bc-14w, plug & play.
Extended 12 months warranty + 24/7 professional lifetime technical support. Photocell control & Work time setting according to personal requirements, practical and useful. Over charge protection, over load protection, over discharge protection, reverse protection.
For other brands solar charger, check the polarity of solar before order, a polarity adapter might be required. Optimized charging algorithm and charge stages make sure the battery is fully protected and working more efficient.
