Pioneer TS-A250D4 10″ Dual 4 ohms Voice Coil Subwoofer

#ad
PIONEER(R) TS-A250D4 #ad - For a virtual listening demonstration of these and many other Pioneer car speakers, download the free Pioneer car sound Fit app Pioneer ts-a250d4 10†dual 4 ohms voice coil subwoofer. Careful engineering of the entire motor structure and suspension system voice coil, magnet, surround and spider is required maintain a high level of linearity, even during high Output/ high excursion transients.

Pioneerâ€s car sound fit app is actually a car sound simulator for experiencing in-car sound with your own smartphone. Pioneer a-series sound design purposely matches the subwoofer and full-range Loudspeakers to provide seamless and smooth sound characteristics. Oversized 56 oz. Butyl rubber surround and aramid Fiber spider for strength and linearity during high excursion.

Pioneer TS-A250D4 10" Dual 4 ohms Voice Coil Subwoofer #ad - 10" glass fiber and mica interlaced injection molded polypropylene IMPP cone construction. 10" glass fiber and mica interlaced injection molded polypropylene imps cone constructionbutyl rubber surround and aramid Fiber spider for strength and linearity during high excursionoversized 56 oz Double stacked magnet and vented pole Yoke for increased power handlingpioneer's A-Series sound design purposely matches the subwoofer and full-range loudspeakers to provide seamless and smooth sound characteristics with dynamic, high impact bass that lets you hear and feel The music.

Linear, balanced motion in both the forward and reverse directions of cone movement is critical to accurate reproduction of recorded sound waves. Double stacked magnet and vented pole yoke for increased power handling. Hear the difference between original car speakers And different Pioneer audio upgrades: convince yourself of the level of quality Pioneer can offer For your vehicle.

More information about PIONEER(R) TS-A250D4 #ad

Pioneer GM-D8701 Gm Series 1, 600 Watt Monoblock Class D Amp

#ad
Pioneer GM-D8701 #ad - Free rasp: 10hz-240khz. Signal-to-noise ratio: 100dB. High quality textured flat panel and tough frame. Class d mono amplifier with wired bass boost remote. 500w rms x 1 @ 2ω. 1, 600 watts Max power. Bass boost remote included. 800w rms x 1 @ 1ω. 300w rms x 1 @ 4Ω.

More information about Pioneer GM-D8701 #ad


Similar products



Pioneer GM-D9705 Class-D 5-Channel Amplifier with Wired Bass Boost Remote

#ad
Pioneer #ad - Free rasp: 10hz-240khz. Compared to similarly priced multichannel amplifiers, the variable crossover networks on the GM-D9705 offer increased flexibility and give listeners more control. Block Terminal. Equipped with A/B-SW Input Select. 800w rms x 1 @ 1ω. Ideal for any vehicle including compact vehicles and pick-up trucks with limited real estate, the GM-D9705 also offers installation flexibility for a variety of other applications.

The 5-channel amplifier is rated at 2000 watts max with the A and B channels rated at 75 watts x 4 RMS and the subwoofer output rated at 600 watts at 2 RMS. Pioneer's 5-channel amplifier produces impressive power in an all-in-one solution designed to deliver big sound without sacrificing space. Block terminals for a cleaner installation and direct wire contact minimizing resistance.

Signal-to-noise ratio: 100dB. The gm-d9705 also features a bass Boost Remote for optimal bass level adjustment according to listening preferences and music characteristics. For extra flexibility, a variable LPF makes audio frequency more adjustable according to subwoofer characteristics and personal listening preferences.

Pioneer GM-D9705 Class-D 5-Channel Amplifier with Wired Bass Boost Remote #ad - Ariable high Pass and Low Pass Filters. The gm-d9705's speaker level inputs allow simplify integration into existing aftermarket or factory installed OEM integrated entertainment systems so you can connect your OEM unit or any unit that doesn't have the typical RCA-type inputs without having to buy add-on adapters.

More information about Pioneer #ad


Similar products



Bbox E10S Pro-Series 10" Single Sealed / Wedge Shape Subwoofer Enclosure

#ad
ATREND E10S #ad - Bbox e10s pro-series 10” single sealed / wedge Shape Subwoofer Enclosure 300w rms x 1 @ 4Ω. Ariable high Pass and Low Pass Filters. 800w rms x 1 @ 1ω. Premium oem grade Carpeting for factory look and durability. Enclosure dimensions sub cut out: 9. 125", mounting depth: 9", height: 13. 5", width: 15. 5", depth 1 bottom: 12.

25"depth 2 top: 9. 25". Recessed side Panels increases structural integrity, eliminates unwanted flex and vibration. Specially formulated aliphatic wood glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly. Equipped with A/B-SW Input Select.

Bbox E10S Pro-Series 10" Single Sealed / Wedge Shape Subwoofer Enclosure #ad - 500w rms x 1 @ 2ω. Pro tuned 10" single sealed subwoofer enclosure designed for optimum bass response and low frequency reproduction which is ideal for lower profile sound quality subwoofers. 1" high grade mdf front baffle for ultimate structural rigidity and no-flex construction. 067 cubic feet net volume internal air space is ideal for tight accurate bass reproduction.

Cnc miter & dado design and construction for the ultimate in air tight precision fit of all parts which ensures a rattle and noise free environment.

More information about ATREND E10S #ad


Similar products



PIONEER TS-A1670F 3-Way 320 Watt A-Series Coaxial Car Speakers

#ad
Pioneer TS-A1670F #ad - 2, 000 watts Max Power. Block Terminal. Shallow depth factory speaker locations in your vehicle. Free rasp: 10hz-240khz. Carbon and mica reinforced IMPP woofer cone. 800w rms x 1 @ 1ω. Signal-to-noise ratio: 100dB. 1mm pet dome tweeters. Equipped with A/B-SW Input Select. Elastic polymer Surround material. These pioneer car speakers are custom-fit to replace original factory speakers to provide drop-in replacement installation with improved acoustic performance.

The pioneer a-series ts-a1670F 3 Way, 6-1/2 in. Power handling: peak: 320 watts per pair/ RMS: 70 watts per pair. 300w rms x 1 @ 4Ω. 500w rms x 1 @ 2ω. 5" a-series 3-way car speakers. Ariable high Pass and Low Pass Filters. These car speakers also feature pioneer open & smooth sound concept which provides a seamless and smooth transition between the woofer and midrange tweeter drivers to deliver uniform, off-axis Frequency response that is optimized for automotive applications where one or more speakers are often aimed away from the listeners' Ears.

PIONEER TS-A1670F 3-Way 320 Watt A-Series Coaxial Car Speakers #ad - Speaker system is an excellent choice to greatly improve sound quality and the audio experience for 6-1/2 in. Pro tuned 10" single sealed subwoofer enclosure designed for optimum bass response and low frequency reproduction which is ideal for lower profile sound quality subwoofers. 1" high grade mdf front baffle for ultimate structural rigidity and no-flex construction.

More information about Pioneer TS-A1670F #ad


Similar products



Pioneer TS-A1680F 6.5" 350 Watt 4-Way Coaxial Car Speakers

#ad
Pioneer TS-A1680F #ad - Power handling: peak: 320 watts per pair/ RMS: 70 watts per pair. Power handling: peak: 350 watts per pair/ RMS: 80 watts per pair. Carbon and mica reinforced IMPP woofer cone. 6. 1mm pet dome tweeters. Elastic polymer Surround material. Free rasp: 10hz-240khz. 5" a-series 4-way car speakers. 500w rms x 1 @ 2ω. The tsp-a speakers are designed to replace the vehicle's factory installed speakers and produce improved sound quality at exceptional value.

Elastic polymer Surround material. Pioneer next generation of tsp-a Series speakers offer improved bass and dynamic Range, higher power handling and a new cosmetic design. 5" a-series 3-way car speakers. Carbon and mica reinforced IMPP woofer cone. Pro tuned 10" single sealed subwoofer enclosure designed for optimum bass response and low frequency reproduction which is ideal for lower profile sound quality subwoofers.

Pioneer TS-A1680F 6.5" 350 Watt 4-Way Coaxial Car Speakers #ad - 1" high grade mdf front baffle for ultimate structural rigidity and no-flex construction. Ariable high Pass and Low Pass Filters. 300w rms x 1 @ 4Ω. Block Terminal.

More information about Pioneer TS-A1680F #ad


Similar products



SCOSCHE LOC2SL Car Stereo 2-Channel Audio Adjustable Amplifier Add-On Adapter with Remote Control Knob in Black

#ad
SCOSCHE LOC2SL #ad - Ariable high Pass and Low Pass Filters. 500w rms x 1 @ 2ω. 6. 5" a-series 4-way car speakers. 5" a-series 3-way car speakers. Pro tuned 10" single sealed subwoofer enclosure designed for optimum bass response and low frequency reproduction which is ideal for lower profile sound quality subwoofers. 1" high grade mdf front baffle for ultimate structural rigidity and no-flex construction.

Perfect for fast installation when adding a subwoofer to your factory car stereo system for a new sound experience. Equipped with A/B-SW Input Select. 800w rms x 1 @ 1ω. Block Terminal. Free rasp: 10hz-240khz. 300w rms x 1 @ 4Ω. Elastic polymer Surround material. Power handling: peak: 350 watts per pair/ RMS: 80 watts per pair.

SCOSCHE LOC2SL Car Stereo 2-Channel Audio Adjustable Amplifier Add-On Adapter with Remote Control Knob in Black #ad - Carbon and mica reinforced IMPP woofer cone. Carbon and mica reinforced IMPP woofer cone. 067 cubic feet net volume internal air space is ideal for tight accurate bass reproduction. Cnc miter & dado design and construction for the ultimate in air tight precision fit of all parts which ensures a rattle and noise free environment.

More information about SCOSCHE LOC2SL #ad


Similar products



SoundBox Connected 4 Gauge Amp Kit Amplifier Install Wiring Complete 4 Ga Installation Cables 2200W

#ad
SoundBox Connected ECK4 #ad - Power handling: peak: 350 watts per pair/ RMS: 80 watts per pair. Recessed side Panels increases structural integrity, eliminates unwanted flex and vibration. Specially formulated aliphatic wood glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly.

. 500w rms x 1 @ 2ω. Equipped with A/B-SW Input Select. Elastic polymer Surround material. Signal-to-noise ratio: 100dB. Inline agu fuse holder w/ 80 amp AGU Fuse / Protective Black Wire Loom. Premium oem grade Carpeting for factory look and durability. Enclosure dimensions sub cut out: 9. 125", mounting depth: 9", height: 13.

SoundBox Connected 4 Gauge Amp Kit Amplifier Install Wiring Complete 4 Ga Installation Cables 2200W #ad - 5", width: 15. 5", depth 1 bottom: 12. 25"depth 2 top: 9. 25". 6. Pro tuned 10" single sealed subwoofer enclosure designed for optimum bass response and low frequency reproduction which is ideal for lower profile sound quality subwoofers. 1" high grade mdf front baffle for ultimate structural rigidity and no-flex construction.

More information about SoundBox Connected ECK4 #ad


Similar products



BBox E10SV Single 10" Vented Carpeted Subwoofer Enclosure

#ad
ATREND E10SV #ad - Pro tuned 10" single sealed subwoofer enclosure designed for optimum bass response and low frequency reproduction which is ideal for lower profile sound quality subwoofers. 1" high grade mdf front baffle for ultimate structural rigidity and no-flex construction. Net volume - 082". Bbox e10sv 10-inch single vented Subwoofer Enclosure  W 16.

00" x h 12. 00" x d 15. 50"   -  vent W 1. 25" x h 1050" x deep 24. 00"  "l" shape ventGross Cu. 6. Ariable high Pass and Low Pass Filters. 1. 25  net Cu. Premium Charcoal Carpet. 800w rms x 1 @ 1ω. 2, 000 watts Max Power. Black/white triple shielded Twisted Pair RCA Interconnect: 17 Feet. 1mm pet dome tweeters.

More information about ATREND E10SV #ad


Similar products



InstallGear 4 Gauge Complete Amp Kit Amplifier Installation Wiring Wire

#ad
InstallGear IG4AKR #ad - Carbon and mica reinforced IMPP woofer cone. Pro tuned 10" single sealed subwoofer enclosure designed for optimum bass response and low frequency reproduction which is ideal for lower profile sound quality subwoofers. 1" high grade mdf front baffle for ultimate structural rigidity and no-flex construction.

Signal-to-noise ratio: 100dB. Elastic polymer Surround material. Ariable high Pass and Low Pass Filters. 500w rms x 1 @ 2ω. Equipped with A/B-SW Input Select. Block Terminal. Elastic polymer Surround material. Power handling: peak: 350 watts per pair/ RMS: 80 watts per pair. 5" a-series 4-way car speakers. Black/white triple shielded Twisted Pair RCA Interconnect: 17 Feet.

InstallGear 4 Gauge Complete Amp Kit Amplifier Installation Wiring Wire #ad - 067 cubic feet net volume internal air space is ideal for tight accurate bass reproduction. Cnc miter & dado design and construction for the ultimate in air tight precision fit of all parts which ensures a rattle and noise free environment. 17ft soft touch 2-Channel RCA Cable. Carbon and mica reinforced IMPP woofer cone.

More information about InstallGear IG4AKR #ad


Similar products



BOSS Audio Systems R1100M Monoblock Car Amplifier - 1100 Watts Max Power, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer Control

#ad
BOSS AUDIO R1100M #ad - Dimensions: the r1100m is 9. 1 inches in depth, 104 inches in Width and 2. 3 inches in Height. 5" a-series 3-way car speakers. 1mm pet dome tweeters. Tweak the bass and feel the vibes with the Remote Subwoofer Control. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers.

Add subwoofers: works with high power car stereos up to 80 watts per channel to add subwoofer systems to any car stereo. Easy to install: Provides amplifier remote turn on output without removing car stereo. Output conversion: Converts car stereo speaker wire outputs to RCA Cable outputs. Additional channel: Allows the addition of 2-channel or mono amplifiers to factory or aftermarket stereos.

BOSS Audio Systems R1100M Monoblock Car Amplifier - 1100 Watts Max Power, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer Control #ad - Controller: includes mountable remote control with knob for adjusting subwoofer bass audio level from the dash. Required for use: You must have an aftermarket amplifier in order to use this product. Buy with confidence: backed by Scosche's Lifetime Tech Support and Limited Lifetime Warranty. 4 gauge red cca copper clad aluminum power wire: 17 Feet / 4 Gauge Black CCA Copper Clad Aluminum Ground Wire: 3 Feet.

This powerful 2-ohm stable amplifier features 1100 Watts Max Power with a MOSFET power supply to rock your tunes. 5" a-series 4-way car speakers.

More information about BOSS AUDIO R1100M #ad


Similar products

Bookmark the permalink.

Comments are closed