Skar Audio Single 12″ 2500W Loaded EVL Series Vented Subwoofer Enclosure | EVL-1X12D2

Skar Audio EVL-1X12D2 - Dimensions: 21. 00" wide x 15. 875" high x 19. 25" deep. Single 12-inch dual 2 ohm eVL Series Loaded Subwoofer Enclosure Ported Box. The engineering behind developing a driver that is able to accurately handle the frequency range of these notes with authority is what makes this woofer so unique. Subwoofer is pre-loaded and Wired to a 1 Ohm Final Impedance Load.

Enclosure air space: 2. 00 cubic ft | tuned @ 38 Hz. Rated conservatively at 1, 500 watts peak power, when combined with the 3-inch, high temperature, the EVL-12 features a high flux double stack ferrite motor, 4-layer, 250 watts RMS and 2, which, black aluminum caw voice coil - allow for extreme power handling for extended periods of time.

We take the guess work out of pairing the components of your system up, and make it easy to get the bass you've always wanted in your ride. The dual 2-ohm subwoofer included in this package is pre-configured and wired up inside of the subwoofer enclosure at a 1-ohm final load to ensure an easy and hassle free installation.

Skar Audio Single 12" 2500W Loaded EVL Series Vented Subwoofer Enclosure | EVL-1X12D2 - Vented enclosure turned @ 38 Hz, Gross Air Space: 2. 00 cubic ft. Vented design of enclosure and Heavy Duty MDF Construction Allow for Maximum Bass. This package is equipped with one, 12-inch, skar audio EVL Series subwoofer, dual 2-ohm, which is pre-loaded and wired up inside of a premium single 12-inch wedge-style ported enclosure.

More information about Skar Audio EVL-1X12D2

Skar Audio RP-1500.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1500W

Skar Audio RP-1500.1D - Highly efficient Heatsink Design allows for Maximum Reliability & Performance. Frequency response: 20hz - 250hz, on-board Bass EQ Switch with +6 or +12dB boost at 45Hz. Designing the most efficient, well built, high quality amplifiers is where we start here at Skar Audio, and that is exactly what is delivered in the RP-1500.

1d. This amplifier is by far one of the most popular and affordable mono-blocks we have ever released, and is great for powering a "daily driver" subwoofer stage in any vehicle. Featuring 4-way protection circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Conservatively rated at 1, with the capabilities of reaching beyond 1, 500 watts RMS power at a 1-ohm load, 900 watts at max power output.

Skar Audio RP-1500.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1500W - You'll have full reign over your amplifier with the built-in user control panel, and variable adjustment tunings for gain level, +6, low-pass filter, featuring a bass EQ switch 0, +12dB, and subsonic filter. This amplifier comes with a remote subwoofer level control bass knob allowing the user to have full control over their bass from the front of the vehicle.

Stable at 1 ohm | Remote Subwoofer Level Control Included. In addition to all the above features, which will give the user the peace of mind knowing they are protected against damage to the amplifier for various reasons - including electrical shortage, low voltage, this model also features 4-way protection circuitry, overheating, and more.

The rp-15001d is 1-ohm stable and utilizes a wide array premium internal components that make it extremely powerful and reliable - such as its high speed MOSFET power supply and advanced PCB board layout.

More information about Skar Audio RP-1500.1D


Similar products



Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1200W

Skar Audio RP-1200.1D - Peak power at 1 ohm: 1, 900 watts | rms power at 1 Ohm: 1, 500 Watts. This amplifier is by far one of the most popular and affordable mono-blocks we have ever released, and is great for powering a pair of 600 watt rms subwoofers or a single 1, 200 watt rms subwoofer. Skar audio engineered the RP-12001d class d monoblock subwoofer amplifier to be dominant in both power and reliability compared to anything else on the market in its' class.

Designing the most efficient, well built, high quality amplifiers is where we start here at Skar Audio, and that is exactly what is delivered in the RP-1200.1d. Featuring 4-way protection circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Conservatively rated at 1, 200 watts rms power at a 1-ohm load, with the capabilities of reaching beyond 1, 600 watts at max power output.

Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1200W - Frequency response: 20hz - 250hz, on-board Bass EQ Switch with +6 or +12dB boost at 45Hz. Class d mosfet monoblock Power Amplifier. This amplifier comes with a remote subwoofer level control bass knob allowing the user to have full control over their bass from the front of the vehicle. Furthermore, the oversized 4-gauge power and ground terminals found on the amplifier allow for maximum current flow and therefore higher power output and more efficient operation.

Highly efficient Heatsink Design allows for Maximum Reliability & Performance. Featuring 4-way protection circuitry and 4 gauge Power & Ground Input Terminals for Maximum Current Flow.

More information about Skar Audio RP-1200.1D


Similar products



Surge F-0 Flo Series by 0 Gauge 5000W Awg Amplifier Installation Wiring Amp Install Kit

atrend F-0 - Peak power at 1 ohm: 1, 900 watts | rms power at 1 Ohm: 1, 500 Watts. With an extra foot of power wire; pre-terminated power cables and ultraflexible wire; the Flo Series Kits are designed to perform at an optimal level. 3ft stealth black Flo Flex ground cable; pre-terminated for easy access. 18ft envy green flo Flex power wire; pre-terminated for easy access.

Featuring 4-way protection circuitry and 4 gauge Power & Ground Input Terminals for Maximum Current Flow. 0 gauge. Peak power at 1 ohm: 1, 600 watts | rms power at 1 Ohm: 1, 200 Watts. Most power cables in a 0 gauge kit have a conductor cross area of 37. 44 sq mm while this one uses 53. 2 sq mm for more current power to your amp.

Surge F-0 Flo Series by 0 Gauge 5000W Awg Amplifier Installation Wiring Amp Install Kit - 18ft 18-gauge amp turn-on wire. 250a fuse. Damping factor - 15018ft true copper EZ-connect twisted-pair RCA signal cable. In addition this kit has a 100% true copper twisted RCA cable to eliminate engine whine. 5;000w power handling.

More information about atrend F-0


Similar products



SoundBox Connected True 4 Gauge Amp Install Kit AWG Amplifier Wiring Complete Cable-SuperFlex 3500W Extra Long 20 Ft. Power Wire

SoundBox VSK-4 - Class d mosfet monoblock Power Amplifier. Damping factor - 150 Stable at 1 ohm | Remote Subwoofer Level Control Included. General features:soundboxcomplete 4 gauge amplifier kit true american wire gauge standard awg superflex ultra heat Resistant Wire Jacket Premium Heat Durability In-Line ANL Fuse Holder Number of Braided Strands: 7 Number of Strands per Braided Strands: 120 Number of Strands per Cable: 840 Outside Cable Diameter: 10

02mm 1 year manufacturer's Warranty Authorized Internet Dealer20 Ft. 4 gauge strand superFlex Green Power Wire/ 3 Ft. 4 gauge 840 strand superFlex Black Ground Wire18 Ft. 14 gauge green superFlex Speaker Wire/ 18 Ft. 18 gauge black remote Turn-On Wire18 Ft. Green triple shielded rca interconnect cable/ 4 gauge black wire loomheat Tested, Water Resistent InLine ANL Fuse Holder/ 150 Amp ANL FuseConnecting Terminals/ Wire Ties Class d mosfet monoblock Power Amplifier.

SoundBox Connected True 4 Gauge Amp Install Kit AWG Amplifier Wiring Complete Cable-SuperFlex 3500W Extra Long 20 Ft. Power Wire - Frequency response: 20hz - 250hz, on-board Bass EQ Switch with +6 or +12dB boost at 45Hz. Frequency response: 20hz - 250hz, on-board Bass EQ Switch with +6 or +12dB boost at 45Hz. Highly efficient Heatsink Design allows for Maximum Reliability & Performance. Featuring 4-way protection circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow.

Featuring 4-way protection circuitry and 4 gauge Power & Ground Input Terminals for Maximum Current Flow.

More information about SoundBox VSK-4


Similar products



Rockford RFHLC High Level Speaker Signal to Low Level RCA Adapter

Rockford Fosgate RFHLC - Class d mosfet monoblock Power Amplifier. Since day one, we have spearheaded the car audio revolution. We engineer the best audio systems for your lifestyle! Class d mosfet monoblock Power Amplifier. Damping factor - 150 Peak power at 1 ohm: 1, 600 watts | rms power at 1 Ohm: 1, 200 Watts. Rockford fosgate is still the global leader in audio innovation and your passion is our purpose.

Frequency response: 20hz - 250hz, on-board Bass EQ Switch with +6 or +12dB boost at 45Hz. Highly efficient Heatsink Design allows for Maximum Reliability & Performance. Peak power at 1 ohm: 1, 900 watts | rms power at 1 Ohm: 1, 500 Watts. Nothing has changed. Featuring 4-way protection circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow.

Rockford RFHLC High Level Speaker Signal to Low Level RCA Adapter - Stable at 1 ohm | Remote Subwoofer Level Control Included. Featuring 4-way protection circuitry and 4 gauge Power & Ground Input Terminals for Maximum Current Flow. Frequency response: 20hz - 250hz, on-board Bass EQ Switch with +6 or +12dB boost at 45Hz.

More information about Rockford Fosgate RFHLC


Similar products



SoundBox Connected 0 Gauge Amp Kit Amplifier Install Wiring Complete 0 Ga Installation Cables 4000W

SoundBox PCK0 - Stable at 1 ohm | Remote Subwoofer Level Control Included. Frequency response: 20hz - 250hz, on-board Bass EQ Switch with +6 or +12dB boost at 45Hz. General features: 5000 watts peak power rating complete 0 gauge amp install kit superflex ultra heat resistant wire jacket premium heat durability in-line anl fuse holder twisted pair rca interconnect cable premium grade cables   what's included: superflex 0 gauge red cca copper clad Aluminum Power Wire: 18 Feet SuperFlex 0 Gauge Black CCA Copper Clad Aluminum Ground Wire: 3 Feet SuperFlex Twisted Pair RCA Cable: 18 Feet 14 Gauge Clear Speaker Wire: 17 Feet 18 Gauge Blue Remote Wire: 18 Feet Protective Black Wire Loom Inline ANL Fuse Holder 200 Amp ANL Fuse Installation Accessories/ Connectors Terminals, Wire Ties and Wire Loom Included 1 Year Manufacturer's Warranty Authorized Internet Retailer Please Note: Bulk Packaged.

SoundBox Connected 0 Gauge Amp Kit Amplifier Install Wiring Complete 0 Ga Installation Cables 4000W - Set to international standards. Class d mosfet monoblock Power Amplifier. Not for Resale. Wire is not awg american wire gauge. Highly efficient Heatsink Design allows for Maximum Reliability & Performance. Peak power at 1 ohm: 1, 600 watts | rms power at 1 Ohm: 1, 200 Watts. Featuring 4-way protection circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow.

Class d mosfet monoblock Power Amplifier.

More information about SoundBox PCK0


Similar products



SCOSCHE LOC2SL Car Stereo 2-Channel Audio Adjustable Amplifier Add-On Adapter with Remote Control Knob in Black

SCOSCHE LOC2SL - Class d mosfet monoblock Power Amplifier. Perfect for fast installation when adding a subwoofer to your factory car stereo system for a new sound experience. Frequency response: 20hz - 250hz, on-board Bass EQ Switch with +6 or +12dB boost at 45Hz. Featuring 4-way protection circuitry and 4 gauge Power & Ground Input Terminals for Maximum Current Flow.

Class d mosfet monoblock Power Amplifier. Peak power at 1 ohm: 1, 900 watts | rms power at 1 Ohm: 1, 500 Watts. Frequency response: 20hz - 250hz, on-board Bass EQ Switch with +6 or +12dB boost at 45Hz. The scosche amplifier 2-channel adapter is the ideal solution for taking the high signal from your stock stereo or amplifier and then tapping into the stock speaker wire and converting it to a 2-channel RCA signal output Mountable level control with adjustable knob included that lets you adjust the bass audio levels of the subwoofer directly from the dash.

SCOSCHE LOC2SL Car Stereo 2-Channel Audio Adjustable Amplifier Add-On Adapter with Remote Control Knob in Black - This speaker wire to rca converter is compatible with high power car stereos up to 80 watts per channel. Highly efficient Heatsink Design allows for Maximum Reliability & Performance. Damping factor - 150 Peak power at 1 ohm: 1, 600 watts | rms power at 1 Ohm: 1, 200 Watts. Featuring 4-way protection circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow.

Stable at 1 ohm | Remote Subwoofer Level Control Included.

More information about SCOSCHE LOC2SL


Similar products



Mission Enduracool Cooling Helmet Liner, Black, One Size

Mission Athlete Care 103911 - Also great to wear under baseball caps. It works by absorbing moisture and perspiration into the fabric core where the unique radiator-like fiber construction circulates water molecules and regulates the rate of evaporation to create a prolonged cooling effect. This new technology is activated when the material is soaked with water, wrung out, and then snapped in the air to activate the cooling properties.

Featuring 4-way protection circuitry and 4 gauge Power & Ground Input Terminals for Maximum Current Flow. Peak power at 1 ohm: 1, 600 watts | rms power at 1 Ohm: 1, 200 Watts. Featuring 4-way protection circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Frequency response: 20hz - 250hz, on-board Bass EQ Switch with +6 or +12dB boost at 45Hz.

Mission Enduracool Cooling Helmet Liner, Black, One Size - Perfect for any helmet sport including football, hockey, cycling and lacrosse. Class d mosfet monoblock Power Amplifier. Damping factor - 150 Stable at 1 ohm | Remote Subwoofer Level Control Included. Class d mosfet monoblock Power Amplifier. Constructed from a proprietary cooling material to custom form to the head and maximize the cooling effect to keep you cooler during competition.

Peak power at 1 ohm: 1, 900 watts | rms power at 1 Ohm: 1, 500 Watts.

More information about Mission Athlete Care 103911


Similar products



Surge F-4 Flo Series by Surge 4 Gauge 2000W AWG Amplifier Installation Wiring Amp Install Kit

atrend F-4 - Our full awg kits include everything needed to correctly install a mobile audio amplifier. Damping factor - 150 Featuring 4-way protection circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Peak power at 1 ohm: 1, 900 watts | rms power at 1 Ohm: 1, 500 Watts. All kits come with a anl premium fuse holder and include full 100% Copper RCA Cables.

Product description flo Series Envy Green amplifier installation kits by Surge are redefining the standard. Tested, confirmed and approved! Most power cables in a 4 gauge kit have a conductor cross area 15. 14 mm² while ours use 21. 61mm². Featuring 4-way protection circuitry and 4 gauge Power & Ground Input Terminals for Maximum Current Flow.

Class d mosfet monoblock Power Amplifier. Flo amplifier kits including: 18 ft 4 gauge envy green flo flex power cable : pre-terminated for easy access 3 ft 4 gauge stealth black flo flex ground cable, pre-terminate for easy access 18 ft 12 gauge ez connect speaker Wire 18 Ft 18 Gauge Amplifier Turn on Wire 18 Ft True Copper EZ Connect Twisted Pair RCA Signal Cable 1 x Platinum Plated ANL Fuse Holder with 100A Fuse 1 x 6ft Black Split Loom Tube 2 x 4 Gauge Spade Terminals With Black Sleeve 5 x 12-14Gauge Spade Terminal With Black & White Sleeve 4 x #6.

Surge F-4 Flo Series by Surge 4 Gauge 2000W AWG Amplifier Installation Wiring Amp Install Kit - 3 female disconnectors with black & white sleeve 3 x bv connectors, 2pcs bv1, 1pc BV8 1 x Φ10 Wire Grommet 3 x Black Self-tapping Screws 20 x Black Cable Ties Class d mosfet monoblock Power Amplifier. With an extra foot of power wire, pre-terminated power cables and ultra-flexible wire, the FLO Series Kits are designed to perform at an optimal level.

Highly efficient Heatsink Design allows for Maximum Reliability & Performance.

More information about atrend F-4


Similar products



SoundBox Connected 4 Gauge Amp Kit Amplifier Install Wiring Complete 4 Ga Installation Cables 2200W

SoundBox Connected ECK4 - Not for Resale. Wire is not awg american wire gauge. Frequency response: 20hz - 250hz, on-board Bass EQ Switch with +6 or +12dB boost at 45Hz. Featuring 4-way protection circuitry and 4 gauge Power & Ground Input Terminals for Maximum Current Flow. Class d mosfet monoblock Power Amplifier. Damping factor - 150

Peak power at 1 ohm: 1, 600 watts | rms power at 1 Ohm: 1, 200 Watts. Featuring 4-way protection circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Set to international standards. Class d mosfet monoblock Power Amplifier. Highly efficient Heatsink Design allows for Maximum Reliability & Performance.

SoundBox Connected 4 Gauge Amp Kit Amplifier Install Wiring Complete 4 Ga Installation Cables 2200W - Stable at 1 ohm | Remote Subwoofer Level Control Included. Frequency response: 20hz - 250hz, on-board Bass EQ Switch with +6 or +12dB boost at 45Hz. General features:  2300 watts peak power rating complete 4 gauge amp install kit heat resistant wire jacket premium heat durability in-line agu fuse holder triple shielded rca interconnect cable premium grade cables   what's included:  4 gauge red cca copper clad aluminum power Wire: 17 Feet 4 Gauge Black CCA Copper Clad Aluminum Ground Wire: 3 Feet Black/White RCA Interconnect: 17 Feet 16 Gauge Brown/Silver Speaker Wire: 17 Feet 18 Gauge Blue Remote Wire: 18 Feet Protective Black Wire Loom Inline AGU Fuse Holder 80 Amp AGU Fuse Installation Accessories/ Connectors Terminals, Wire Ties and Wire Loom Included Authorized Internet Retailer 1 Year Manufacturer's Warranty Please Note:  Bulk Packaged.

Peak power at 1 ohm: 1, 900 watts | rms power at 1 Ohm: 1, 500 Watts.

More information about SoundBox Connected ECK4


Similar products

Bookmark the permalink.

Comments are closed