SunFounder Mega 2560 Case Enclosure Transparent Gloss Acrylic Computer Box Compatible with Arduino Mega 2560 Rev3 R3, Genuino Mega 2560 Rev3 and other Arduino Compatible Mega

It is made by high grade acrylic, which provides excellent protection and vogue appearance. Package includes 1 x mega 2560 Acrylic Case Protective case of Mega 2560 Fastened by eight screws. Made by premium acrylic. Provides excellent protection, and fashionable appearance. Unique design for mega 2560 with pin leakage, which provides easy connection to other components.

Introduction this product is protective case of SunFounder Mega 2560, fastened by eight screws. 2. It's suitable for arduino mega 2560 rev3, genuino Mega 2560 Rev3, SunFounder Mega 2560 and other Arduino boards compatible with Mega. It is designed for the mega 2560 board with slot for pins, eanbling easy connection to other components.

Note: 1. This product is only a protective case for Mega 2560, not including a Mega board. 4. If you are not sure whether this case is suitable for your Mega 2560 or not, just check the reset button's position on your board. If it's located near the USB port, then the case can be applied to your board. 3. It may not be suitable for the latest Arduino Mega 2560 of arduino.

---

SunFounder Mega 2560 R3 ATmega2560-16AU Board compatible with Arduino

It communicates using the original STK500 protocol reference, C header files. The power source is selected automatically. The atmega2560 has 256 kb of flash memory for storing code of which 8 kb is used for the bootloader, 8 KB of SRAM and 4 KB of EEPROM which can be read and written with the EEPROM library.

The mega 2560 board for arduino comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol reference, C header files. The atmega2560 has 256 kb of flash memory for storing code of which 8 kb is used for the bootloader, 8 KB of SRAM and 4 KB of EEPROM which can be read and written with the EEPROM library.

The power source is selected automatically. For more information, please refer to http://wiki. Sunfounder. Cc/index. Php?title=install_arduino_software the MEGA 2560 Board can be powered via the USB connection or with an external power supply. The mega 2560 board for arduino comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer.

Specification: input voltage - 7-12v 54 digital i/o pins 14 pwm outputs 16 analog inputs 256k flash memory 16mhz Clock Speed Package include: 1 x SunFounder MEGA 2560 R3 Arduino-compatible The mega 2560 board can be powered via the USB connection or with an external power supply.


Similar products

---

SunFounder Uno R3 Case Enclosure New Transparent Gloss Acrylic Computer Box Compatible with Arduino UNO R3

The power source is selected automatically. The atmega2560 has 256 kb of flash memory for storing code of which 8 kb is used for the bootloader, 8 KB of SRAM and 4 KB of EEPROM which can be read and written with the EEPROM library. The mega 2560 board for arduino comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer.

It is made by high grade acrylic, which provides excellent protection, with fashion appearance. Package includes 1x r3 acrylic box the mega 2560 board can be powered via the USB connection or with an external power supply. It communicates using the original STK500 protocol reference, C header files. Protective case of UNO R3.

. This is unique design for UNO R3 with pin leakage, which provides easy connection to other components. Note: this product is only R3 acrylic protective case, there is no R3 board. Install Instructions: https://app. Box. Com/s/n9g32eed3ldly71xtng4 this product is protective case of SunFounder R3, fastened by eight screws.

Made by high grade acrylic. Provides excellent protection, with fashion appearance.


Similar products

---

ARDUINO A000067 DEV BRD, ATMEGA2560, ARDUINO MEGA 2560 R3

Made by high grade acrylic. Unique design for uno R3 with pin leakage, which provides easy connection to other components. It communicates using the original STK500 protocol reference, C header files. Protective case of UNO R3. Arduino a000067 dev brd, atmega2560, arduino mega 2560 r3 the mega 2560 board can be powered via the USB connection or with an external power supply.

Price For: Each. Fastened by eight screws. Provides excellent protection, with fashion appearance. The power source is selected automatically. The atmega2560 has 256 kb of flash memory for storing code of which 8 kb is used for the bootloader, 8 KB of SRAM and 4 KB of EEPROM which can be read and written with the EEPROM library.

The mega 2560 board for arduino comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer.


Similar products

---

SunFounder Project Super Starter Kit with Tutorial Book for Arduino UNO R3 Mega2560 Mega328 Nano with MEGA 2560 - Including 73 Page Instructions Book

The power source is selected automatically. The atmega2560 has 256 kb of flash memory for storing code of which 8 kb is used for the bootloader, 8 KB of SRAM and 4 KB of EEPROM which can be read and written with the EEPROM library. The mega 2560 board for arduino comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer.

19 projects lesson 1 blinking led lesson 2 controlling an led by button lesson 3 controlling an led by pwm lesson 4 controlling an led by potentiometer lesson 5 flowing led lights lesson 6 rgb led lesson 7 dc motor control lesson 8 lcd1602 lesson 9 serial monitor lesson 10 7-segment display lesson 11 74hc595 lesson 12 dot-matrix led display lesson 13 ne555 timer lesson 14 rotary encoder lesson 15 adxL335 Lesson 16 Simple Creation - Light Alarm Lesson 17 Simple Creation - Traffic Light Lesson 18 Simple Creation - Digital Dice Lesson 19 Simple Creation - Small Fan Package included: 1 x Project Box 1 x Booklet 1 x RGB 40 x Pin Header 1x 555 Timer IC 2 x Optocoupler 4N35 2 x Shift Resister 74HC595N 1 x H-Bridge L293D 1 x Accelerometer ADXL335 1 x Rotary Encoder 5 x Push-Button small 8 x Resistor 220 Ohm 4 x Resistor 1k Ohm 4 x Resistor 10k Ohm 1 x Resistor 1M Ohm 1 x Resistor 5.

1m ohm 1x switch 1 x potentiometer 50kΩ 1 x lcd1602 character display 1 x dot matrix display 8x8 2 x 7-segment character display 1 x dc motor 16 x led red 2 x led white 2 x led green 2 x led yellow 2 x npn transistor s8050 2 x pnp transistor S8550 4 x Capacitor Ceramic 100nF 4 x Capacitor Ceramic 10nF 4 x Diode Rectifier 1 x Breadboard 1 x USB Cable 65 x Jumper Wire Male to Male 20 x Dupont wire Female to Male 1 x Passive Buzzer 1 x Fan The mega 2560 board can be powered via the USB connection or with an external power supply.

Unique design for uno R3 with pin leakage, which provides easy connection to other components. It communicates using the original STK500 protocol reference, C header files. Protective case of UNO R3. The kit includes some basic tutorials like blinking an LED, controlling a buzzer, etc.


Similar products

---

Elegoo MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable Compatible With Arduino

Microcontroller: atmega2560 operating voltage: 5v input:voltagerecommended :7-12v input voltage limits : 6-20V Digital I/O Pins: 54 of which 15 provide PWM output Analog Input Pins: 16 DC Current per I/O Pin: 40 mA DC Current for 3. 3v pin: 50 ma flash memory: 256 kb of which 8 kb used by bootloader sram: 8 kb eeprom: 4 kb clock speed: 16 mhz package includes: 1 x Mega 2560 ATmega2560-16AU Board Arduino-compatible 1 x USB cable The mega 2560 board can be powered via the USB connection or with an external power supply.

It communicates using the original STK500 protocol reference, C header files. Protective case of UNO R3. Price For: Each. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. Unique design for uno R3 with pin leakage, which provides easy connection to other components.

The chip is atmega2560-16au and Atmega16u2, same with the official version. Improved and expert version: 1. 0 pinout: added sda and scl pins that are near to the aref pin and two other new pins placed near to the RESET pin, shields will be compatible both with the board that use the AVR, the IOREF that allow the shields to adapt to the voltage provided from the board.

In future, which operate with 5V and with the Due that operate with 3. 3v.


Similar products

---

Elegoo Mega 2560 Project The Most Complete Ultimate Starter Kit w/ TUTORIAL for Arduino Mega2560 UNO Nano

The second one is a not connected pin, that is reserved for future purposes. Stronger reset circuit. Use 5. 5 * 2. 1mm dc barrel jack compatible with 5. 5 * 2. 5mm dc barrel jack. Price For: Each. Made by high grade acrylic. Component listing: 25pcs led white, blue, yellow, red, green 1pcs rgb led 10pcs ceramic capacitor22pf & 104pf 2pcs photoresistor 1pcs thermistor 5pcs diode rectifier 1n4007 4pcs electrolytic capacitor 10uf 50v & 100uf 50v 10pcs npn transistor pn2222 & s8050 1pcs tilt switch 5pcs button small 1pcs 1 digit 7-segment display 1pcs 4 digit 7-segment display 1pcs Sound Sensor Module 1pcs LCD1602 Module with pin header 1pcs IC L293D 1pcs IC 74HC595 1pcs Active Buzzer 1pcs Passive Buzzer 1pcs RTC Module 1pcs DHT11 Temperature and Humidity Module 2pcs Potentiometer 1pcs Rotary Encoder Module 1pcs Joystick Module 1pcs Keypad Module 1pcs 5V Relay 1pcs IR Receiver Module 1pcs MEGA2560 Controller Board 1pcs Breadboard 1pcs Servo Motor SG90 1pcs Stepper Motor 1pcs ULN2003 Stepper Motor Driver Board 1pcs Prototype Expansion 1pcs Power Supply Module WARNING: Pls.

Fastened by eight screws. It communicates using the original STK500 protocol reference, C header files. Protective case of UNO R3. Our dream is to make the best price and best quality produce for customers. The power source is selected automatically. The atmega2560 has 256 kb of flash memory for storing code of which 8 kb is used for the bootloader, 8 KB of SRAM and 4 KB of EEPROM which can be read and written with the EEPROM library.




Similar products

---

Arduino Compatible Mega 2560 Atmega2560 Mega2560 R3 Board + USB Cable

Digital i/o pins: 54 of which 15 provide PWM output. The power source is selected automatically. The atmega2560 has 256 kb of flash memory for storing code of which 8 kb is used for the bootloader, 8 KB of SRAM and 4 KB of EEPROM which can be read and written with the EEPROM library. The mega 2560 board for arduino comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer.

Operating voltage: 5v, input voltage recommended: 7-12V, Input Voltage limit: 6-20V. Microcontroller board based on the ATmega2560 Fastened by eight screws. Premium sunfounder super Kit provides you tutorials to learn about Arduino, designed for beginners also experienced hobbyists. With detailed user manual containing 19 projects, Fritzing images, datasheets, code, and so on.

The user manual pdf can be downloaded from Technical Specification in the Product Information. Well-designed case for the package, inside which can be divided into 8 grids for storing the components by category. The latest sunfounder Mega 2560 R3 development board is included. The mega is 100% compatible with Arduino and most shields designed for the Arduino.

Nice package with clear listing and surprise including a nice small box to keep the widget such as LED, buttons, diodes, IC, etc. We have always cared about the customer experience and improve the product function details.


Similar products

---

Arduino Uno Zebra Case Black Ice

Reset button for r3 built in case is designed for authentic Arduino Uno R3 - We are committed to making the best cases, and if you are ever unsatisfied for any reason, contact us and we will make it right: [email protected] Net the mega 2560 board can be powered via the USB connection or with an external power supply.

Frame the uno's elegance, while leaving access to I/O pins, and protecting it with this solid case. The second one is a not connected pin, that is reserved for future purposes. Stronger reset circuit. Use 5. 5 * 2. 1mm dc barrel jack compatible with 5. 5 * 2. 5mm dc barrel jack. In future, which operate with 5V and with the Due that operate with 3.

3v. Nice package with clear listing and surprise including a nice small box to keep the widget such as LED, diodes, buttons, IC, etc. We have always cared about the customer experience and improve the product function details. Fitted with the ATMEGA16U2 chip. Keyhole mounts provides a quick, and clean way to attach your uno to a surface.




Similar products

---

Elegoo 120pcs Multicolored Dupont Wire 40pin Male to Female, 40pin Male to Male, 40pin Female to Female Breadboard Jumper Wires Ribbon Cables Kit for arduino

We have the manufacture factory, making productions and selling by ourselves. Free pdf tutorial in the CD more than 35 lessons. Lcd1602 module and gy-521 sensor module with pin header no need to solder by yourself. Made by high grade acrylic. Component listing: 1pcs 40-pin male to female jumper wires 1pcs 40-pin male to malejumper wires 1pcs 40-pin female to female jumper wires The mega 2560 board can be powered via the USB connection or with an external power supply.

Each cable length: about 20cm /8-inch. The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers. Including 1x 40-pin male to female jumper wires, 1x 40-pin male to male jumper wires, 1x40-pin female to female jumper wires.

Packing in a bubble envelope. Premium sunfounder super Kit provides you tutorials to learn about Arduino, designed for beginners also experienced hobbyists. With detailed user manual containing 19 projects, code, datasheets, Fritzing images, and so on. The user manual pdf can be downloaded from Technical Specification in the Product Information.

Well-designed case for the package, inside which can be divided into 8 grids for storing the components by category. The latest sunfounder Mega 2560 R3 development board is included.


Similar products

---

Wall Adapter Power Supply - 9V DC 650mA

Fastened by eight screws. Input: 100 - 240V AC. Sram: 8 kb, eeprom: 4 KB. Packed inside a white box. Free pdf tutorial in the CD more than 35 lessons. Lcd1602 module and gy-521 sensor module with pin header no need to solder by yourself. Designed and Made in the USA. Operating voltage: 5v, input voltage recommended: 7-12V, Input Voltage limit: 6-20V.

Nice package with clear listing and surprise including a nice small box to keep the widget such as LED, IC, buttons, diodes, etc. We have always cared about the customer experience and improve the product function details. Fitted with the ATMEGA16U2 chip. 5. 5 x 2. 1 mm plug center positive. Provides excellent protection, with fashion appearance.

It communicates using the original STK500 protocol reference, C header files. Protective case of UNO R3. The second one is a not connected pin, that is reserved for future purposes. Stronger reset circuit. Use 5.


Similar products