Top 10 Aluminum Flag Pole Rings – Flagpole Hardware

As an Amazon Associate I earn from qualifying purchases.

1. Ripeng

#ad

6 Pieces Flag Pole Rings 360 Degree Rotating Anti-Tangle Flagpole Ring Aluminum Alloy Flag Pole Ring Mounting Ring Clip for 0.75 to 1 Inch Diameter Flag Pole Silver

#ad
Ripeng #ad - Package content: you will receive 6 sets flag pole rings, 3 x hex wrenches and 1 x manual, 6 x snap hooks, each flag pole ring is approx. Durable material: our flag pole ring is made of aluminum alloy which is durable and sturdy, not easy to deform or rust, so it can be applied for a long time and the proper size will not take up too much spaces.

360 degree anti-wrap design: the aluminum alloy flag pole ring allows flag to fly in the wind, preventing the flag from wrapping around the flagpole, more durable and not easy to rust, rotating more smoothly, it will effectively reduce tangling problems.11 inch/ 2. 54 cm in inner diameter and 1. 46 inches/ 3. 71 cm in outside diameter, the height is 1. 18 inches/ 2. 99 cm, including 6 x flag pole rings, the size is suitable for 075 to 1 inch diameter flag pole; Please note that the flagpoles which are out of the range cannot be installed; Please confirm the size before purchasing.

Durable snap hooks: here are 3 pieces useful aluminum alloy snap hooks which are designed for flags with grommets, hanging the snap hook between the flagpole ring hole and the flag pole. Easy to install: you just need to install 2 rings to the flagpole, then attach the top and bottom grommets of the flag to the snap hooks located on the rings, then adjust the position on the flag, finally tighten the small positioning screws through hex wrench to ensure rings are mounted; In order to ensure normal installation, please confirm the size before buying.
BrandRipeng #ad
ManufacturerRipeng #ad
Part NumberRipeng-240911

2. BonyTek

#ad

Silver, BonyTek 2 Pack Aluminum Alloy Flag Pole Rings, 360 Degree Rotating Flagpole Flag Mounting Rings Spinning Flag Pole Kit with Carabiner for 0.75-1.00 Inch Diameter Flagpole Φ 1 inch

#ad
BonyTek #ad - Hanging the carabiner between the Flagpole Ring Hole and the Flag Grommet, for Connecting the Flagpole and Flag. Note: more Than 1. 0 inches outside diameter of the Flagpole Can't Be Used. Lightweight, no deformation, No Flading, Durable, No Rust, No Cracking.

They can adapt to a Variety of Harsh Environments. Designed for flags with grommets & comes with two Carabiners. The mounting rings have a rotating anti-wrap ring, It allows Flags to Fly Freely in the Direction of the Wind, and Preventing the Flag from Wrapping Around the Flagpole. High quality aluminum alloy and carabiner design.

To avoid hanging buckles affecting the rings 360 degrees rotating. 2 pack mounting rings and 2 Pcs Carabiners with Gift Box for You. Install note: please pay attention to install Direction. Be sure to keep installation as described in picture. With adjustable screw, specifically designed for 075-1. 0 inch outside Diameter Flag Poles. 360 degrees free rotating mounting rings.
BrandBonyTek #ad
ManufacturerBonyTek #ad
Height1.18 Inches
Length1.5 Inches
Weight0.22 Pounds
Width1.5 Inches
Part Number4332687516

3. YARKOR

#ad

360 Degree Rotating Tangle Free Flagpole Flag Mounting Rings Spinning Flag Pole Kit with Carabiner for 0.75-1.02 Inch DiameterSliver, YARKOR Flag Pole Clip, Aluminum Alloy Flag Pole Rings

#ad
YARKOR #ad - What this means is the outside diameter of the flagpole is 075-1" inch. Easy installation - our flag pole mounting ring clip will take you less than 5 seconds to install. Super strong aluminum alloy - these mounting rings are constructed to withstand the ourdoor elements such as rain, wind or harsh sunlight.

Meticulously crafted - designed for flags with grommets & Comes With Two Carabiners - Hanging the Carabiner Between the Flagpole Ring Hole and the Flag Grommet, for Connecting the Flagpole and Flag. The material is rust free, they can adapt to a variety of harsh environments. Simply attach the clip to flag's grommet, adjust its position on the flag pole and secure the screw with hex key included.

Designed for flags with grommets. Tangle free design - the mounting rings have a 360 degrees rotating anti-wrap ring, It allows flags to fly freely in the direction of the wind, and preventing the flag from wrapping around the flagpole. One inch diameter - compatible with any flagpoles that's 1 inch diameter or less.
BrandYARKOR #ad
ManufacturerYARKOR #ad
Part NumberFlagPoleRings
ModelFlagPoleRings

4. Hotop

#ad

4 Pieces Flag Pole Rings Aluminum Alloy Mounting Rings 360 Degree Rotating Flagpole Anti Wrap Flag Pole with Clip Hook for 1 Inch Diameter Flag Pole Silver

#ad
Hotop #ad - Anti-wrap design: the flag pole rings are deigned with a 360 degree rotating anti-wrap ring, which allows flags fly freely in the direction of the wind, and preventing the flag from wrapping around the flagpole. Material and size: our flag pole rings are made of aluminum alloy, durable and no rust for you to use with a long time; The inner diameter of ring is 1 inch, so it's fit for 1 inch diameter flagpole, measure the diameter of your flagpole carefully.

Crafted equipment: there are 2 pieces clip hooks for you hanging the clip between the flagpole ring hole and the flag grommet, which help you to connect the flagpole and flag, let you apply more easily. Package details: the package comes with 4 pieces 360 degree rotating flagpoles and 4 pieces clip hooks, sufficient quantity will meet you daily demands, the inner diameter is 1 inch/ 2.

54 cm, the outside diameter is 1. 46 inches/ 3. 71 cm and the height is 1. 18 inches/ 2. 99 cm. Easy to install: you just need to install the 2 aluminum alloy mounting rings to the flagpole, then attach the top/ bottom grommets of the flag to the clip hook located on the rings, and then adjust its position on the flag pole.
BrandHotop #ad
ManufacturerHotop #ad
Height1.57 Inches
Length4.13 Inches
Width2.76 Inches

5. BONWIN

#ad

BONWIN Flag Pole Rings, Aluminum Alloy Spinning Flag Pole Kit Parts for 0.75-1.02" Diameter 1 Inch, 2 Pcs Anti Wrap Flag Pole Clips Swivels, 360° Rotating Flagpole Flag Mounting Rings, Silver

#ad
BONWIN #ad - To make your flag freely fly around the flagpole in wind! Premium aluminium alloy material- perfect connectors for your flag pole and flags! The construction of rings and clips are well made and enough strong, last and no rust. Can be better withstand rain wind or harsh sunlight, durable, and not easy cracked and discolor than plastic mounting rings.

Note: more than 1 inch diameter of the flagpole, please choose large size flagpole rings. Designed for flags with grommets & with gift box- comes with 2 pcs aluminium carabiners for connecting flagpole and the flag with grommets. Perfect gift box protection packaging for you. Note: please don't pull the flag too tightly between rings. Easy to setup- to avoid affecting the 360 degrees rotating effect, the top ring should face down and the bottom ring should face up see the picture, then connect with your flag and adjust the distance of the flag, finally use a wrench to fix the position of the flagpole ring.

We provide warranty, if you are not satisfied, 100% refund money or replacement. Great upgrade design of 360 degree rotating tangle free flag pole mounting ring and new hexagon socket screw prove the excellent anti-winding performance. 360 degree rotating & anti-wrap design- keep your flag from being a tangled mess in wind. 1 inch diameter with adjustable screw- bonwin 2 pack 1" flag pole clips hardware kits, specifically designed for 075-1.
BrandBONWIN #ad
ManufacturerBONWIN #ad
Height1.5 Inches
Length4.72 Inches
Width3.35 Inches

6. ROCEN

#ad

360° Rotating Flagpole Flag Mounting Rings, Aluminum Alloy Anti Wrap Flagpole Rings Clips Flag Parts Kit for 0.75-1 Inch Diameter Pole, Pack of 2, ROCEN Flag Pole Rings

#ad
ROCEN #ad - Easy to installaccording to the diameter of your flagpole, select the appropriate screw; install the two rings to the flagpole, then attach the Top/Bottom Grommets of The Flag to The Carabiners Located On The Rings; Then Adjust Its Position On The Flag Pole and Manually Tighten The Knurled Screws; Finally Tighten The Small Positioning Screws via Hex Wrench To Ensure Rings are Securely Mounted.

Install note: please Be sure to keep installation as described in picture. Exclusive improved rotating high-strength steel Ring, It Allows Flags to Fly Freely in The Wind, Also Not Easy To Bend Or Break. Long screw Fit for 075'' flagpole, short Screw Fit for 1'' Flagpole. Fit for 075-1 inch diameter flagpolerings inner diameter is 1 inch, comes with 2pcs long or short screws, allows you to install any flagpoles In The 075-1 inch diameter range By Adjustable Two Screws.

With three durable carabinerspackage includes 2pcs essential aluminum alloy Carabiners and Free Give 1Pcs Spare Carabiner, Designed for Flags with Grommets. It will effectively Reduce Tangling Issue! Premiun quality & hex wrench are made of high quality aircraft Grade Aluminum Alloy, Durable & heavy dutythe flagpole rings & Screws & Carabiners & No Rust, No Deformation, No Cracking. The unique positioning screw Hole Design will Help To Withstand Harsh Weather Elements!
BrandROCEN #ad
ManufacturerROCEN #ad
Height1.18 Inches
Length1.46 Inches
Width1.46 Inches

7. Somtton

#ad

Pack of 2, Somtton Flagpole Mounting Rings Set,Aluminum Alloy Flag Pole Rings, 360 Degree Rotating Rings with Carabiners for 0.75-1Inch Diameter Flagpole Silver

#ad
Somtton #ad - The anti-rust coating on the surface can prevent rust. High-quality: these mounting rings are made of high-quality aluminum alloy, which will not be deformed or cracked. 100% customer satisfaction: all our products come with installation instructions, easy to install.

In order to pursue 100% customer satisfaction, if you have any questions, please contact us in time and we will try our best to help you solve them. Easy installation - our flag pole rings just attach the clip to flag grommet, adjust its position on the flag pole and secure the screw with hex key included. It can withstand various harsh outdoor factors, such as rain, wind, and sunlight.

Specification: comes with adjustable screw, compatible with any flagpoles that's 1 inch diameter or less. Anti-wrap design:these mounting rings are anti-wrapped, effectively 360° rotatable that allows the flag to move freely from the pole. It prevents your flag from tangling up. Aluminum alloy mounting rings are specifically designed for 075-1 inch outside diameter American flag poles.
BrandSomtton #ad
ManufacturerSomtton #ad
Part NumberTRU5923339A0302

8. Anley

#ad

Pack of 2, Anley 1.25" Aluminum Flagpole Mounting Rings Set, Anti Wrap 360° Rotatable Ring with Carabiners, Ideal for 1-1/4 Inch Diameter Flag Pole & Flag with 2 Grommets Silver

#ad
Anley #ad - These mounting rings are anti-wrapped, effectively 360° rotatable. Package includes - 2 pieces of mounting rings, with carabiners. For better performance, you can utilize lubricant on the rotating parts.

All elements are designed to withstand harsh weather. Heavy duty - these mounting rings have a longer lifecycle than others. Tangle free - set you free from unwrapping your flag over and over again. Designed for flags with grommets, and is compatible with any flagpoles that diameter of 1. 25". Warranty - we stand behind our products! All items sold by ANLEY come with a 3-MONTH replacement warranty. Premium quality - if you are not satisfied with the performance of plastic mounting rings, you should try these! Constructed with aluminum alloy, coupled with carabiners. The aluminum is rust free and widely used in all weather conditions.
BrandAnley #ad
ManufacturerAnley #ad
Height1.6 Inches
Length4.7 Inches
Weight0.01 Pounds
Width3.3 Inches
Part NumberA.FlagPole.Ring.Sil.1.26
ModelA.FlagPole.Ring.Sil.1.26

9. Mtsooning

#ad

360 Degree Rotating Flagpole, Aluminum Alloy Flag Pole Rings 2Packs, Flag Mounting Rings Spinning Flag Pole Kit with Carabiner for 0.75-1.02Inch Diameter Flagpole Silver

#ad
Mtsooning #ad - Maximum diameter of the hole: 25mm1inch. The minimum diameter of the hole: 19mm075inch. 360 degrees free rotating flag pole mounting rings. It only fits any flag pole that diameter ranges from 087" to 1".

High-quality: aluminum alloy and carabiner design. The mounting rings have a rotating anti-wrap ring, It allows Flags to Fly Freely in the Direction of the Wind, and Preventing the Flag from Wrapping Around the Flagpole. Designed for flags with grommets & comes with two Carabiners. Two pieces in a pack. 2 pack mounting rings and 2 Pcs Carabiners for You.

Excellent anti-winding performance: 360 degrees free rotating mounting Rings. Height: 30mm1. 18inch. Designed for flags with grommets. Specifications: the inner diameter is 1 inch. Hanging the carabiner between the Flagpole Ring Hole and the Flag Grommet, for Connecting the Flagpole and Flag. Size: material: aluminum; color: silver. With an adjustable screw.
BrandMtsooning #ad
ManufacturerMtsooning #ad
Part NumberSZ070030013097RK-1

10. VIEKEY

#ad

VIEKEY Flag Pole Rings 1'' Aluminum Rotating Against Rotating Flag Pole Mounting Rings Aluminum Alloy Anti Wrap Flag Pole Clips Flag Pole Parts for 1 Inch Diameter Pole

#ad
VIEKEY #ad - Hanging the carabiner between the Flagpole Ring Hole and the Flag Grommet, for Connecting the Flagpole and Flag. Simply attach the clip to flag's grommet, adjust its position on the flag pole and secure the screw with hex key included.

The material is rust free, they can adapt to a variety of harsh environments. Package includes 2 pcs essential aluminum alloy carabiners, Designed for Flags with Grommets. All elements are designed to withstand harsh weather. The mounting rings have a rotating anti-wrap ring, It allows Flags to Fly Freely in the Direction of the Wind, and Preventing the Flag from Wrapping Around the Flagpole. These mounting rings are constructed to withstand the ourdoor elements such as rain, wind or harsh sunlight.

The internal diameter is 1. 038 inch,flag poles less than 1. 02 inch in diameter are suitable 360 Degrees Free Rotating Mounting Rings. The aluminum is rust free and widely used in all weather conditions. Our flag pole mounting ring clip will take you less than 5 seconds to install. These mounting rings have a longer lifecycle than others.
BrandVIEKEY #ad
ManufacturerVIEKEY #ad

Top 10 1.25 Flag Pole Rings – Flagpole Hardware

As an Amazon Associate I earn from qualifying purchases.

1. BonyTek

#ad

BonyTek 2 Pack Aluminum Alloy Flag Pole Rings, 360 Degree Rotating Flagpole Flag Mounting Rings Spinning Flag Pole Kit with Carabiner for 1.25 Inch Diameter Flagpole Φ 1.25 inch, Silver

#ad
BonyTek #ad - Hanging the carabiner between the Flagpole Ring Hole and the Flag Grommet, for Connecting the Flagpole and Flag. High quality aluminum alloy and carabiner design. Note: more Than 1. 25 inches outside diameter of the Flagpole Can't Be Used.

Install note: please pay attention to install Direction. 2 pack mounting rings and 2 Pcs Carabiners with Gift Box for You. With adjustable screw, specifically designed for 1. 25 inch outside Diameter Flag Poles. 360 degrees free rotating mounting rings. Be sure to keep installation as described in picture. Designed for flags with grommets & comes with two Carabiners.

To avoid hanging buckles affecting the rings 360 degrees rotating. The mounting rings have a rotating anti-wrap ring, It allows Flags to Fly Freely in the Direction of the Wind, and Preventing the Flag from Wrapping Around the Flagpole. They can adapt to a Variety of Harsh Environments. Lightweight, durable, No Flading, no deformation, no rust, No Cracking.
BrandBonyTek #ad
ManufacturerBonyTek #ad

2. Anley

#ad

Ideal for 1-1/4 Inch Diameter Flag Pole & Flag with 2 GrommetsSilver, Pack of 2, Anti Wrap 360° Rotatable Ring with Carabiners, Anley 1.25" Aluminum Flagpole Mounting Rings Set

#ad
Anley #ad - Premium quality - if you are not satisfied with the performance of plastic mounting rings, you should try these! Constructed with aluminum alloy, coupled with carabiners. For better performance, you can utilize lubricant on the rotating parts.

All elements are designed to withstand harsh weather. Heavy duty - these mounting rings have a longer lifecycle than others. Warranty - we stand behind our products! All items sold by ANLEY come with a 3-MONTH replacement warranty. Package includes - 2 pieces of mounting rings, with carabiners. Designed for flags with grommets, and is compatible with any flagpoles that diameter of 1. 25". Tangle free - set you free from unwrapping your flag over and over again. The aluminum is rust free and widely used in all weather conditions. These mounting rings are anti-wrapped, effectively 360° rotatable.
BrandAnley #ad
ManufacturerAnley #ad
Height1.6 Inches
Length4.7 Inches
Weight0.01 Pounds
Width3.3 Inches
Part NumberA.FlagPole.Ring.Sil.1.26

3. Stanwood Wind Sculpture

#ad

Anodized Aluminum Spinner with Stainless Steel Bearing, 1 1/4", Pack of 2, Made in The USA, Large Size, Stanwood Wind Sculpture Non Tangle Flagpole Swivel/Rotating Ring

#ad
Stanwood Wind Sculpture #ad - Stainless steel bearings. Heavy-duty anodized aluminum. Fits poles with an outer diameter between 1 and 1. 25 inch.
BrandStanwood Wind Sculpture #ad
ManufacturerStanwood Wind Sculpture #ad

4. Pacific Flag Supply

#ad

2 Pack, Lightweight Durable Design with Carbiner, Silver, 1.25" Mounting Rings, Pacific Flag Supply Aluminum Flagpole Rotating Rings, Tangle Free Never Furl Spinning Flagpole Ring

#ad
Pacific Flag Supply #ad - Engineered with a pATENTED premium quality aluminum and carabiner design. Aluminum construction will outperform and outlast inferior plastic rings which break and discolor over time. The lightweight yet durable design is made to withstand the elements year after year. For best results, lubricate spinning area generously. Compatible with 1. 25" diameter flagpoles adjustable interior diameter between "1. 25 to 1. 00".
BrandPacific Flag Supply #ad
ManufacturerPrime-Products #ad
Height4 Inches
Length6 Inches
Weight0.25 Pounds
Width2 Inches

5. www.usflags.com

#ad

White, VF VF00000125 Rotating Flag Rings Fasteners, 1 Pair 1.25-Inch Flagpole

#ad
www.usflags.com #ad - 1 pair rotating flag rings to Fit 1. 25" diameter Flagpoles. Fits flagpoles Commonly Sold At Warehouse Stores. Includes 2 Rings, as Shown. Easily allows you to attach a Flag With Grommets To A 1. 25" flagpole.
Brandwww.usflags.com #ad
ManufacturerFlags Unlimited, Inc. #ad
Part Number00000125
ModelVF00000125

6. All Star Flags

#ad

All Star Flags Rotating Rings Flag Fastener for 1.25" Pole, Pair

#ad
All Star Flags #ad - Rotating flagpole rings to keep your flag from wrapping around the flagpole from ALL STAR FLAGS. All star flags' rotating Rings with clips to fit 1. 25" diameter pole. Sold as a pair of rings - these will not work on a 1" diameter pole. Allows display of flag with grommets. They are for 1. 25" poles only.
BrandAll Star Flags #ad
ManufacturerAll Star Flags #ad
Height1.2 Inches
Length1.25 Inches
Width1.25 Inches
Part NumberASF00125
ModelASF00125

7. BONWIN

#ad

BONWIN Flag Pole Rings, Aluminum Alloy Spinning Flag Pole Kit Parts for 1.02-1.25" Diameter 1.25 Inch, 360° Rotating Flagpole Flag Mounting Rings, 2 Pcs Anti Wrap Flag Pole Clips Swivels, Sliver

#ad
BONWIN #ad - Easy to setup- to avoid affecting the 360 degrees rotating effect, then connect with your flag and adjust the distance of the flag, The top ring should face down and the bottom ring should face up see the picture, finally use a wrench to fix the position of the flagpole ring.

To make your flag freely fly around the flagpole in wind! Premium aluminium alloy material- perfect connectors for your flag pole and flags! The construction of rings and clips are well made and enough strong, durable, last and no rust. Note: less than 1. 02 inch diameter of the flagpole, please choose small size flagpole rings. Note: please don't pull the flag too tightly between rings. Can be better withstand rain wind or harsh sunlight, and not easy cracked and discolor than plastic mounting rings.

Designed for flags with grommets & with gift box- comes with 2 pcs aluminium carabiners for connecting flagpole and the flag with grommets. Perfect gift box protection packaging for you. 1. 25 inch diameter with adjustable screw- bonwin 2 pack 1. 25" flag pole clips hardware kits, specifically designed for 1. 02-1. 25 inch outside diameter flag poles.
BrandBONWIN #ad
ManufacturerBONWIN #ad
Height1.5 Inches
Length4.72 Inches
Width3.35 Inches

8. Annin Flagmakers

#ad

2-Pack, Annin Flagmakers 286125 Rotating Flag Pole Ring, 1.25"

#ad
Annin Flagmakers #ad - Use with 1. 25" diameter flag poles. 2 pack. 1. 25". For use with aluminum pole flag set model # 31839.
BrandAnnin Flagmakers #ad
ManufacturerAnnin Flagmakers #ad
Height2 Inches
Length6 Inches
Weight0.35 Pounds
Width3 Inches
Part Number286125

9. Flow.month

#ad

Tangle Free, Pack of 2, UPSTONE Aluminum Flagpole Rotating Rings, Silver, 360° Anti Wrap Flag Pole Mounting Rings with Carabiner for 1.25 Inch Diameter Flag Pole

#ad
Flow.month #ad - Specification - comes with adjustable screw, specifically designed for 1. 02-1. 25 inch outside Diameter Flag Poles. If you need any help, please contact us through Amazon. 100% satisfaction guarantee: we are a professional supplier of flagpole rings! We provide 3-month free replacement or return, 6-months warranty service.

High quality: high quality aluminum alloy and carabiner design, Lightweight, Durable, No Rust, No Flading, No Deformation, No Cracking. Can withstand the outdoor elements year after year, will outperform and outlast inferior plastic rings which are known to break and discolor easier. It allows flags to fly freely in the direction of the wind, and preventing the flag from wrapping around the flagpole, it is recommended to apply some lubricant to maximize the rotation performance.

Note: more Than 1. 25 inch outside diameter of the Flagpole Can't Be Used. Newly upgraded flagpole rings: redesigned the rotating ring structure for better rotation. And we upgraded the set screws, no protruding part of the screw, so the flag is not entangled with the screw. Pack of 2. Designed for flags with grommets. Excellent anti-winding performance: the mounting rings have a Rotating Anti-wrap Ring.
BrandFlow.month #ad
ManufacturerSeetoon #ad
Height1.18 Inches
Length1.73 Inches
Width1.73 Inches
Part NumberAFVXH-2FG
ModelSEETOON01

10. Valley Forge

#ad

Valley Forge 6' x 1 1/4" 1-Piece Brushed Aluminum Flag Pole 6' x 1.25"

#ad
Valley Forge #ad - Made by valley Forge Flag. 6 feet long, the diameter of the flagpole is 1. 25" also known as 1-1/4". Silver ball ornament. Doesn't include a flag or bracket. Comes with one removable anti-wrap ring and one fixed ring on top. These anti-wrap rings will help limit the flag from wrapping around the flagpole.
BrandValley Forge #ad
ManufacturerValley Forge Flag #ad
Height2 Inches
Length75 Inches
Width2 Inches
Part Number60745
Model60745