Top 10 Charge Controllers for Solar Panels – Renewable Energy Controllers

As an Amazon Associate I earn from qualifying purchases.

1. PowMr

#ad

Max 48V 1560W Input Adjustable Parameter LCD Display Current/Capacity and Timer Setting ON/Off with 5V Dual USB, PowMr 60a Charge Controller, Solar Panel Charge Controller 12V 24V

#ad
PowMr #ad - Backlight lcd display pv/ battery/ load charge and discharge parameter. Pwm charge controller protection - dual mosfet reverse current/ over heat /Under-voltage discharge discharge / short-circuit / open-circuit / over-load/ over-charging protection.

12 months honor warranty from powmr and 24hrs after service. Adjustable floating voltage/ LVD/ LVR/ Load Timer according needs for this charge controller. This solar charge controller fit for lead-acid batteries open, once the voltage of the battery drop below 8V, AGM, GEL with mutiple load timer. Our email: [email protected] Com. Load should be DC. Notes: for any reason you are unsatisfied with our product, just feel free to contact support for exchange or refund.

More safe using for home, industrial, commercial etc. Add feature: charge and Discharge Current, Charge and Discharge energy recording function. Fully 4-stage pwm charge boost, 12v780w / 24v1560w input, abS, Float, Equalization, Dual USB can give your electronic product max 5V 2A. This 60a charge controller compatibility with 12v and 24v system. For protecting the lifespan of your battery, the solar controller will turn off automatically.
BrandPowMr #ad
ManufacturerPowMr #ad

2. Binen

#ad

20A Solar Charge Controller Solar Panel Battery Intelligent Regulator with Dual USB Port 12V/24V PWM Auto Paremeter Adjustable LCD Display

#ad
Binen #ad - Fully 3-stage pwm charge management, improve system efficiency and prolong the life span of the battery. Lcd display: comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc.

20a solar charge controller : binen solar charger controller are ul 1741 certified, build-in industrial micro controller, the solar charger controller compatibility with 12V 24V system. Please be careful to install the charger controller on a flat, and finally the load! The disassembly sequence is contrary to the wiring order. Dual mosfet reverse current protection, then the solar panel, well-ventilated place. Discharge current: 10A, automatically manage the working of solar panel and battery in solar system.

Multiple protection functions: binen solar controller has short-circuit protection, open-circuit protection, reverse protection, over-load protection. Easy to install and operate: the charge controller should connect the battery first, low heat production. For protecting the lifespan of your battery, the solar controller will turn off automatically. Dual usb output 5V/2. 5a max, to support mobile phone chargeing. Note: the charge controller will heat up when it is running.
BrandBinen #ad
ManufacturerBinen #ad
Weight0.37 Pounds
Part Number4332694907

3. Renogy

#ad

Renogy Wanderer 10 Amp 12V/24V PWM Negative Ground Solar Charge Controller Regulator Compatible with Bluetooth Module

#ad
Renogy #ad - Smart 4-stage pwm charging bulk, and equalization increases battery life and improves system performance. Wanderer10a|30a installation notes: the default starting position of the wanderer controller terminal hatches are closed in the UP position that could mistakenly look like an open wire hatch.

Compact in size makes it easy to install virtually anywhere. Integrated 5v 2a usb ports to charge USB devices. Capable of charging over-discharged lithium batteries. Then secure each cable by rotating the screws clockwise CW to the closed position. Integrated rs232 port allows communication with BT-1 Bluetooth module and usage of Renogy BT smartphone app. Backlit lcd screen displays system operation, diverse load control, and error codes. Optimized for a 12v/24v system; deep Cycle Sealed AGM, Gel, Flooded and Lithium battery option ready.

Power source Type: Solar-Powered. Make sure to first lower each terminal hatch by screwing the terminals counterclockwise CCW to expose the wire terminal hatch to the open position. Intelligent protection against reverse polarity, Float, Boost, short-circuit, overcharging, and reverse current. Simple install: fully open the hatch CCW, insert the appropriate wires, and completely close the hatch CW.
BrandRenogy #ad
ManufacturerRenogy #ad
Height1.1 Inches
Length4.7 Inches
Width3 Inches
Part NumberCharge Controller
ModelWanderer 10 Amp 12V/24V
Warranty1-year material warranty

4. EEEKit

#ad

Dual USB Port Solar Panel Battery Intelligent Regulator, Multi-Function Adjustable LCD Display with Timer Setting On/Off Hours, EEEKit 30A Solar Charge Controller, 12V24V 30A

#ad
EEEKit #ad - Easy to usethe charge controller should connect the battery first, then the solar panel, and finally the load! You can change the settings by the simple one-button operation. Reliable protectioneeekit solar charge regulator provides over-current protection, short-circuit protection, inverse connection protection, low voltage and overcharge protection, a reliable protector for your devices.

Intelligentbuild-in industrial microcontroller for automatical management, memorizing various parameters set by the user and the data won't be lost when the battery runs out. Wide compatibilitythe solar charger controller with 30a rated discharge current is compatible with 12V or 24V system automatically, GEL.

The solar controller will turn off automatically once the voltage is too low. Dual usb 5v/3a output ports support mobile phones, AGM, suitable for lead-acid batteries: OPEN, tablet PCs or other devices that require 5V voltage. Functional lcd displayintuitive lcd display that can clearly indicate the status and data is able to switch modes and parameter configuration, suitable for home, commercial, industrial, etc.
BrandEEEKit #ad
ManufacturerEEEKit #ad
Height2.5 Inches
Length7 Inches
Width13.5 Inches
Part NumberH026100-E008135338

5. AMPINVT

#ad

AMPINVT 60A MPPT Solar Charge Controller 12V 24V 36V 48V Auto,Max 150VDC Input 3400 Watts Solar Regulator

#ad
AMPINVT #ad - Multiple protection against overcharge, over discharge, reverse polarity, over load, short circuit, over heat and battery under voltage.

Solar panel: fit for 900w12v;1700w24v;3400w48v;Max input Voltage:150V PV. Lcd display-clear to see operating data and working condition, Real-time energy statistics function with Multiple load control modes, Mppt solar charge controller Display the daily power generation curve and current curve. The tracking rate of maximum power is ≥99% and the maximum conversion rate is >98%. Support 4 charging options: sealed gel agM Flooded Lithium Battery,User-defined, 12V 24V 48V Auto.
BrandAMPINVT #ad
ManufacturerTop One Power #ad
Height3.58 Inches
Length12.32 Inches
Width9.06 Inches
WarrantyManufacturer warranty for 365 days from date of purchase

6. Autoday-3C

#ad

Vehpro MPPT 40A-100A 12V/24V Auto Focus Tracking Solar Panel Regulator Dual USB Port Charge Controller 100A

#ad
Autoday-3C #ad - Mppt solar charge controller mppt10-60: compared with normal solar charge controller, this MPPT controller could increase efficiency by 10%-30%. Any problem please contact with us, we will try our best to solve your problem and make you satisfied within 24 hours.

It is not suited for nickel metal hydride, AGM, lithium ions or other batteries. When the battery voltage is low, the controller will automatically cut off the load from the system. If the voltage of battery is back to normal and the load will restart working. Note: the regulator is only suitable for lead acid batteries: OPEN, GEL. This mppt controller has perfect soc function, and supply power to the loads. Prevent the battery from over-charging, control charge current, over-discharging and reverse charging to solar panels during nights.
BrandAutoday-3C #ad
ManufacturerAutoday #ad
Part NumberAutoday-771

7. iSunergy

#ad

ISunergy MPPT Solar Charge Controller 100A 12V/24V Auto Solar Panel Intelligent Regulator with Dual USB Port LCD Display for Lead Acid Batteries

#ad
iSunergy #ad - All necessary protections equipped, adjustable controlling parameter of the system, easy to set up and operate. High quality components, perfecting system performance, with maximum conversion efficiency of 98%.

Dual usb output, the maxmum current of 2. 5a, to support Apple's mobile phone charging. Advanced maximum power point tracking mppt technology, with efficiency no less than 99. 5%. Large-screen lcd display, cumulative power generation and discharge power query, charging and discharging current display, light control + delay control; adjustable charge and discharge parameter, temperature display, with power-off memory and other functions.

Ultra-fast tracking speed and guaranteed tracking efficiency. Reverse current protection, reverse protection, having self-recovering and do not damage the controller. Build-in short-circuit protection, low heat production, open-circuit protection, over-load protection.
BrandiSunergy #ad
ManufactureriSunergy #ad
Part NumberBL912F

8. Binen

#ad

30A Solar Charge Controller, Solar Panel Charge Controller 12V 24V Dual USB Charge Regulator Intelligent, Adjustable Parameter Backlight LCD Display and Timer Setting ON/Off Hours 30A

#ad
Binen #ad - Battery type: the charge regulator is only suitable for lead-acid batteries: oPEN, once the voltage of the battery drop below 8V, GEL, Liions, it is not suited for nickel hydride, or other batteries. Multiple protection functions: binen solar controller has short-circuit protection, improve system efficiency and prolong the life span of the battery.

Lcd display: comes with a display that can clearly indicate the status and data, industrial, it can be conveniently switched modes and parameter configuration, suitable for home, commercial etc.30a solar charge controller : binen solar charger controller are ul 1741 certified, automatically manage the working of solar panel and battery in solar system. Easy to install and operate: the charge controller should connect the battery first, then the solar panel, and finally the load! The disassembly sequence is contrary to the wiring order.

Dual mosfet Reverse current protection, low heat production. For protecting the lifespan of your battery, AGM, lithium, the solar controller will turn off automatically. Note: the charge controller will heat up when it is running. Fully 3-stage pwm charge management, once the voltage of the battery drop below 8V, reverse protection, open-circuit protection, the solar controller will turn off automatically. Please be careful to install the charger controller on a flat, well-ventilated place. Dual usb output 5V/2.
BrandBinen #ad
ManufacturerBinen #ad
Height1.97 Inches
Length3.94 Inches
Weight0.44 Pounds
Width1.97 Inches

9. ZEALLIFE

#ad

ZEALLIFE Solar Panels Charge Controller, 8A Battery Regulator for 12V Solar Battery Charger, Solar Battery Maintainer and 12 Volt Batteries Power Kit Safe Protection

#ad
ZEALLIFE #ad - It is suitable for 12V rechargeable batteries. The solar panels can convert light energy into electric energy stored in batteries which will be protected by the solar controller. The product also provides overcharge, overload protection, as well as short-circuit and reverse-connection protection.

All-round protection :the product provides overcharge, over-discharge, as well as short-circuit and reverse-connection protection. Users don't have to worry about positive + and negative -. In order to lengthen its service life, the maximum voltage 22V, please do not overload. Advantage 1: it will turn off automatically at night, overload protection, and won’t consume battery power. Advantage 2: if there is connection errors,it will not be damaged. Quick and easy connection:this solar charge controller uses SAE plugs for easy use and access to solar panels, batteries and loading equipment.

The maximum input of solar energy is 130w:the maximum power of solar panels is130W, and the maximum current 8A. The controller needs to be connected to a battery to work. Apply to 12v solar panels:the 8a solar controller is used only for 12V solar panels and 12V batteries. Easy to monitor the led indicator lights:the solar controller integrates two LED lights, over-discharge, green fully charged and yellow charging.
BrandZEALLIFE #ad
ManufacturerZEALLIFE #ad
Height3.9 Inches
Length4.7 Inches
Weight5.9 ounces
Width1.5 Inches
Part NumberSolar Panels Charge Controller 8A
ModelSolar Panels Charge Controller 8A

10. SolarEpic

#ad

EPEVER MPPT Solar Charge Controller 40A 150V PV Solar Panel Controller Negative Ground W/ MT50 Remote Meter + Temperature Sensor PC Monitoring CableTracer4215BN

#ad
SolarEpic #ad - A solid state relay is recommended if you are using a Power Inverter. 150v max pv input allow this charge controller handles more Solar Panels Wiring in Series to minimize PV current, 5 x 12V Solar Panel Connecting in Series will be applicable.

This 40 amp mppt solar panel charger works with 600w solar panel on 12v battery system and 1200w on 24V Battery. Negative grounding mppt solar charge controller tracer4215bn, the Advanced MPPT Control Algorithm makes this 40 Amp MPPT Controller Tracking Efficiency higher than 99. 5%. Work with all lead acid batteries, sealed AGM GEL and Flooded Battery, User mode allows buyer setting their own charging parameters.

Rs-485 communication bus interface and standard MODBUS interface available to meet various communication requirements, Temperature Sensor and PC monitoring Cable Attached. Max solar panel 1560w, multiple load mode allow you set the load on/off in different situation.
BrandSolarEpic #ad
ManufacturerEpsolar #ad
Weight4 Kilograms
Part NumberTracer4215BN-MT50
ModelTracer4215BN-MT50
WarrantyWe offer 2 years limited warranty
Bookmark the permalink.

Comments are closed